ELPLP33 EMP S3 EMP TW20H EMP TWD3 Epson Projector Lamps

Good Quality ELPLP33 Projector Bulb For Epson EMP-S3 EMP-S3L EMP-TW20 EMP-TW20H EMP-TWD1 EMP-TWD3

Epson oriuginal lamp ELPLP33 with housing (HSCR170W/80V UHE) is 100% new and pass the quality checked, the projector lamps are completely covered under our 90-day warranty, which protects against any defective products. We are committed to offering an easy and safe Projector Bulb buying experience that brings enjoyable shopping experience to all our customers.

Specifications:

Warning:
To reduce the risk of personal injury, do not drop the lamp module. The bulb may shatter and cause injury if it is dropped.
Customers’ satisfaction is our top priority. If meeting any problems before or after purchasing, please contact me freely any time. It is our honor to serve you.

If you want your Projector Lamps work longer, please Note:
1. Do not allow the projector to overheat; the primary cause of lamp failure is excessive temperature stress.
2. Allow the projector lamp to cool for at least 10 minutes after powering down, and never move the projector during this period or
while the lamp is on. The lamp is much more susceptible to damage while it is hot.
3. Operate your projector in a clean, relatively dust-free environment to prevent clogging of fans and air filters. These filters
should be cleaned regularly.
4. Allow plenty of space around the projector's fan or exhaust so excess heat can be dispersed properly.
5. Utilize the "economy mode" if it is available with your projector model and is appropriate for your situation. This mode
decreases projector brightness but the lamp will last longer.
6. Never leave a projector in very hot or very cold environments, for example in a car on a summer or winter day.