CP RX94 CP X2021 CP X2021WN OHB DT01241 Hitachi Projector Bulbs
Projector Bulb OHB DT01241 For Hitachi Projector CP-RX94 CP-X2021 CP-X2021WN CP-X2521 CP-X2521WN CP-X302
The DT01241 Projector Lamp from Hitachi for the original lamp in the CP-RX94 CP-X2021 CP-X2021WN CP-X2521 CP-X2521WN CP-X3021 CP-X3021WN projector. Its estimated life is 5,000 hours in a compatible projector's Normal Mode and 10,000 hours in Eco Mode. Our team provides the best quality products, to provide customers with 100% satisfaction quality service. We are willing to strengthen cooperation with each customer to create a better future.
Specifications:
Product name: | Projector Lamp |
Model No. | DT01241 |
Condition: | 100% Brand new |
Type: | Compatible lamp with Housing |
Lamp power: | 215/140W |
Life time : | ≥2000-8000Hour |
Used in the these projector: | CP-RX94 CP-X2021 CP-X2021WN CP-X2521 CP-X2521WN CP-X3021 CP-X3021WN |
Installation: | Easy installation. |
Warranty: | All items have been QC tested and 180 days Warranty at least |
Package: | Each lamp in a single box with foam protection. One pair gloves and instruction inside. |
Warranty
The projector lamps are completely covered under our 180-day warranty, which protects against any defective products.
We are committed to offering an easy and safe Projector Bulb buying experience that brings enjoyable shopping experience to all our customers.
Warranty does not cover: shipping costs, improper installation including damages incurred while attempting installation, any installation or labor costs, lamps damaged by TV projector malfunction, damage due to abuse, lightning or acts of nature, misuse, electrical stress or power surges, loss of use, lost profits.
Installation:
1. Turn off the Projector and unplug the AC power cord.
2. Loosen the screw on the lamp cover with a screwdriver, and then open the lamp cover.
3. Loosen the 2 screws on the lamp with the screwdriver. Hold up the handle, then pull the lamp straight out.
4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 2 screws.
5. Close the lamp cover, and then tighten the screws
6. Plug in the AC power cord.