AC contactor belongs to modular controlling electrical equipment,which has novelty structure,compact size ,it is DIN-RAIL for installation,size of modular,modeling artistic.use of safety,direct acting inversion.And,it can install in the distribution boards along with breakers.
1. Confirm whether the product voltage, current, frequency and use category meet the requirements before use;
2. Connect the control circuit first for no-load operation test and then connect the load in case of no abnormality;
3. Don't make the foreign matters fall into the product
Power circuit | ||
Voltage Rating(Ue) 1P, 2P | 250VAC | |
3P, 4P | 400VAC | |
Endurance(O-C) | ||
Electrical | 100000 cycles | |
Maximum number of switching operation a day | 100 | |
Additional characteristics | ||
Insulation voltage(Ui) | 500VAC | |
Pollution degree | 2 | |
Rated impulse withstand voltage(Uimp) | 2.5kV(4 kV for 12/24/48V AC) | |
Degree of protection (IEC 60529) | Device only | IP20 |
Device in modular enclosure | IP40 | |
Tropicalization (IEC 60068-1) | Treatment 2(relative humidity 95% at 55℃) |