Industrial Electric Heaters Dehumidifier Cabinet , 150 Watt Heater Energy Saving
● Pressure clamp conectors
● Dynamic heating up
● Wide voltage range
● Temperature limiting
● Energy saving
● Clip fixing
● Quick installation
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify installation.
Operating voltage | 120-240V AC/DC* (min. 110V, max. 265V) |
Heating element | PTC resistor, temperature limiting |
Heater body | extruded aluminium profile, anodised |
Connection | 3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end ferrule) and rigid wire 0.5- 2.5mm² |
Connection casing | plastic according to UL94 V-0, black |
Mounting | clip for 35mm DIN rail, EN 60715 |
Fitting position | vertical airflow (air outlet up, connection on bottom) |
Operating/Storage temperature | -45 to +70 °C (-49 to +158 °F) |
Operating / Storage humidity | max. 90 % RH (non-condensing) |
Protection type/Protection class | IP20 / I (earthed) |
Approvals | VDE + UL File No. E150057 |
Accessoires | screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces) |
*Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.
Art. No. | Heating capacity* | Inrush current max. | Pre-fuse T (time-delay) | Length (L) | Weight (approx.) |
14000.0-00 | 15W | 1.5A | 1A | 65mm | 0.3kg |
14001.0-00 | 30W | 3.0A | 2.5A | 65mm | 0.3kg |
14003.0-00 | 45W | 3.5A | 2.5A | 65mm | 0.3kg |
14005.0-00 | 60W | 2.5A | 2.5A | 140mm | 0.4kg |
14006.0-00 | 75W | 4.0A | 4A | 140mm | 0.5kg |
14007.0-00 | 100W | 4.5A | 4A | 140mm | 0.5kg |
14008.0-00 | 150W | 9.0A | 6.3A | 220mm | 0.7kg |
PS: If you can't find the exact type of your product.Please don't rush to go away.Contact me and your questions will be replied ASAP.Thank you for your time.