Model
Specification

Q-120B

Q-120C

Q-120D

CH1

CH2

CH3

CH4

CH1

CH2

CH3

CH4

CH1

CH2

CH3

CH4

DC output voltage

5V

12V

-5V

-12V

5V

15V

-5V

15V

5V

12V

24V

-12V

Output voltage error(Note:2)

±2%

±6%

±6%

±6%

±2%

+10,-5%

±6%

+10,-5%

±2%

±6%

±6%

±6%

Rated output current

11A

4A

1A

1A

10A

3.5A

1A

1A

8A

2A

2A

1A

Output current rage

2-12A

0.5-5A

0.2-1A

0.2-1A

2-12A

0.5-5A

0.2-1A

0.2-1A

2-12A

0.2-5A

0.2-2A

0.2-1A

Wave and noise(Note :3)

80mV

120mV

80mV

120mV

80mV

150mV

80mV

150mV

80mV

120mV

80mV

120mV

Inlet stability(Note :4)

±0.5%

±1%

±1%

±1%

±0.5%

±1%

±1%

±1%

±0.5%

±1%

±1%

±1%

Load stablity (Note :5)

±1%

±5%

±5%

±5%

±0.5%

±7%

±8%

±8%

±0.5%

±7%

±8%

±8%

DC output power

120W

122.5W

124W

Efficiency

77%

76%

80%

Adjustable range for DC voltage

CH1;+10,-5%

CH1;+10,-5%

CH1;+10,-5%

AC input voltage range

88-132VAC/176-264VAC 47-63Hz,240-370VDC

Input current

2.5A/115V 1.25A/230A

AC INnrush current

Cold-start current 35A

Leakage current

<3.5mA/240VAC

Overload proctection

105%-150%Type:Foldback:current limiting reset:auto recovery

Over-voltage protection

CH1:5.75~6.75V

High-temperature protection

…………

Temperature coefficient

±0.03%

Setup rise hold up time

200ms,50ms,20ms

Vibration

10-500Hz,2G 10min,/1cycle,Period for60min,Each axes

Withstand voltage

Input and output internal:1.5KVAC,Input and enclosure: 1.5KVAC,Output and enclosure: 0.5KVAC

Isolation resistance

Input and output internal: Input and enclosure,
Output and enclosure: 500VDC/100MΩ

Working temperature and humidity

-10℃~+60℃(Refer to output derating curve),20%~90%RH

Store temperature and humidity

-20℃~+85℃.10%~95%RH

Overall dimension

199×110×50mm

Weight

0.88Kgs

Safety standards

UL 1950 TUV EN 60950 Approved

EMC standards

CISPR22(EN55022)class B,IEC8011-2,3,4,IEC555-2 Approved

Note:
1. The testing condition for the paramenter above is :230VAC input,rated load,25℃70% RH.Humidity.
2. Error.include the setting error,line stability and load stability.(Note:5).
3. Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.
4. Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.
5. Load stability test:the load is from 0% to 100%.
6. Total output canbe maximum Current,total load can not exceed the maximum output power
7, C_2,3,11 must be knocked down.