Model
Specification

T-60A

T-60B

T-60C

CH1

CH2

CH3

CH1

CH2

CH3

CH1

CH2

CH3

DC output voltage

5V

12V

-5V

5V

12V

-12V

5V

15V

-15V

Output voltage error

(Note:2)

±2%

±6%

±6%

±2%

±6%

±6%

±2%

±6%

±6%

Rated output current

5A

2.5A

0.5A

5A

2.5A

0.5A

5A

2.5A

0.5A

Output current rage

0.5-7A

0.2-3.5A

0-0.1A

0.5-7A

0.2-3.5A

0-0.1A

0.5-7A

0.2-3.5A

0-0.1A

Wave and noise(Note :3)

100mVp-p

100mVp-p

100mVp-p

100mVp-p

100mVp-p

100mVp-p

100mVp-p

100mVp-p

100mVp-p

Inlet stability(Note :4)

±0.5%

±1%

±0.5%

±0.5%

±1%

±0.5%

±0.5%

±1%

±0.5%

Load stablity (Note :5)

±1%

±4%

±1%

±1%

±4%

±1%

±1%

±4%

±1%

DC output power

57.5W

61W

62.5W

Efficiency

72%

72%

72%

Adjustable range for DC voltage

CH1;+10,-5%

CH1:+10,-5%

CH1:+10,-5%

AC input voltage range

85-264VAC 47-63Hz；120-370VDC

Input current

2A/115V 1A/230A

AC INnrush current

Cold-start current 30A/115V 60A/230V

Leakage current

<1mA/240VAC

Overload proctection

105%-150%Type:Foldback:current limiting reset:auto recovery

Over-voltage protection

CH1:5.75-6.75V

High-temperature protection

…………

Temperature coefficient

±0.03%/℃(0-50℃)ON+5V

Setup rise hold up time

800ms,50ms,10ms/115VAC 300ms.50ms,80ms/230VAC

Vibration

10-500Hz,2G 10min,/1cycle,Period for60min,Each axes

Withstand voltage

Input and output internal:1.5KVAC,Input and enclosure: 1.5KVAC,Output and enclosure: 0.5KVAC

Isolation resistance

Input and output internal:Input and enclosure,Output and enclosure: 500VDC/100MΩ

Working temperature and humidity

-10℃~+60℃(Refer to output derating curve),20%~90%RH

Store temperature and humidity

-20℃~+85℃.10%~95%RH

Overall dimension

159×97×38mm

Weight

0.56Kgs

Safety standards

UL 1012 TUV EN60950(IEC950,UL1950)

EMC standards

CISPR22(EN55022),class B,IEC801-2,-3,-4,IEC555-2 Verification

Note:
1. The testing condition for the paramenter above is :230VAC input,rated load,25℃70% RH.Humidity.
2. Error.include the setting error,line stability and load stability.(Note:5).
3. Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.
4. Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.
5. Load stability test:the load is from 0% to 100%.
6. Total output canbe maximum Current,total load can not exceed the maximum output power.
7. C₂₃must be knocked down.