Single Output Power Supply 600W 12V Long Service Life SE Series
Summary
Technique parameter:
Model | SE-600-5 | SE-600-12 | SE-600-24 | SE-600-48 |
DC output voltage current | 15V 0-100A | 12V 0-50A | 24V 0-25A | 48V 0-12.5A |
Wave and noise | 150mVp-p | 150mVp-p | 150mVp-p | 180mVp-p |
Inlet stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load stablity | ±7% | ±0.5% | ±0.5% | ±0.5% |
Efficiency | 78% | 83% | 87% | 88% |
Adjustable range for DC voltage | ±10% | ±10% | ±10% | ±10% |
input voltage range | 90-132VAC/180-264VAC by switch 254-370vdc 47-63Hz | |||
Inpact current | Cold start current 50A/230VAC 30A/115VAC | |||
Overload proctection | 105%-150% cut off the output, automatic recovery | |||
Over-voltage protection | 120%-140% shut down O/P voltage, re-power on to recover | |||
Setup rise hold up time | 1000ms, 50ms, 16ms/230vac at full load | |||
Withstand voltage | I/P-O/P: 1.5KV I/P-FG:1.5KV O/P-FG:0.5KV 1minute | |||
Isolation resistance | I/P-O/P I/P-FG O/P-FG: 500VDC/100MΩ | |||
Dimension | 247*127*63.5cm | |||
Packing | 37.5*31*25.5cm/6PCS/13.5kg |
The use of power supply
1 . Use the power of money make sure the input voltage specification (110 v / 220 v / 380 v) and going to install and use the power of the input voltage of nominal value.Domestic use products, the main input 220 VAC, so have a selection of 110 V / 220 V, under normal circumstances, the selector switch in the 220 VAC, please pay more attention to customers to use.
2 . In strict accordance with the drawings standard connection, check whether the input and output wires is correct before electricity, so as not to damage the user equipment.
PS: If you can't find the exact type of your product.Please don't rush to go away.Contact me and your questions will be replied ASAP.Thank you for your time.
Product Picture
Dimensions
About us