The Shield Type UAV/drone signal jammer PTC-UAV-S3 is our handheld designed against the widespread use of commercial Drones / UAVs. It disables the targeted UAV / Drones by jamming the remote-control signal and GPS signal, so as to force the UAV to fall or return. The jamming distance reaches more than 500 meters. Channel | Working Frequency | Channel Power(±1dBm) | CH1 | 1550 - 1620MHz | 40dBm/10W | CH2 | 2400 - 2500MHz | 40dBm/10W | CH3 | 5725 - 5850MHz | 40dBm/10W | Total Working Channels | 3 channels | Total Working Output | 30W | Shielding distance | 100-500m | Technology Solution for option | VCO, BTS, AI for option | Battery | 24V/3AH | Battery working time | 40minutes | Built-in internal Antenna | High gain Directional antenna | Power consumption | 90W | Weight | 1.5Kg | Size(Length × width × height) | 280x180x54mm | Humidity | 5%-95% | Operation temperature | -20 to +50℃ | Technical Features 1.Ultrahigh frequency board-band jamming technology and Shield Shape Design 2.High effective power, long jamming Range. 3. Light Weight and Friendly use 4. Built-In 1hour battery operation and high gain Directional Antennas 5.Effective segmentation to block each drone controlled signals. 6.Imported chips, slow start circuit design can avoid the sparking phenomenon caused by mechanical switch, high integration and stable operation. 7.Perfect self-protection function, when the device is overheated, over output -power, standing wave and other fault alarms, the drone signal jammer will automatically cut off the failed module to avoid damage to the drone Jammer. Applications: Any sensitive locations where the drones/UAVs are not allowed to use, like Government, Oilfield, Homeland Security, Large Gathering Place, Counter-terrorism, Army Security, Airport Security, Petrochemical Industry, Sports Venues, VIP Convoy Protection, Schools and Universities etc. |