The Manpack UAV/drone signal jammer PTC-UAV-BP100W is for blocking commercial drones with the frequencies 900mhz+1.5G+2.4G+5.8G, against the widespread use of UAVs nowadays. It disables the targeted UAV by jamming the UAV's remote-control signal and GPS signal, so as to force the UAV to fall or return. The jamming distance reaches more than 1000 meters.

Technical Parameters for PTC-UAV-BP100W

Basic Specifications
Working Frequencies: 4 Frequencies (can be customized)
Each band Power: 25W
Total Output Power:100W
Jam Range: range about 500-1000meters
Power Supply: AC 220V to DC-48V charger
Battery Working time: 30 minutes (more batteries for option, can be changed easily)
Product Size:430*320*120mm
Product Weight: appr.18kgs
Package Contents: Host x 1, AC 220V to DC-48V charger x1, RCUx1, directional antennas x4

Frequency parameters can be customized. Typical frequencies are shown below

Power Amplifier Protectors:
A. Over- Heat protection - Thermal protector
B. Over current protection
C. High input Voltage and low Voltage protection
D. VSWR protection: against antenna miss-match including open and short circuit

Cooling: Heat sink and air forced fans
Power Supply: 220VAC/28VDC Power
consumption: max 300W

Battery:
Battery type: Built-in Lithium Iron Battery
Battery capacity for each Case: 24V-40A
Battery working time: 30minutes
Low battery warning: available
Remaining Battery Indication Interface: available

Physical Data:
Net Weight of Jammer Host: <=18kgs
Dimension: 430*320*120mm
Proof Level: IP54

1. Ultrahigh frequency board-band DDS jamming technology, latest AI technology for option
2. Backpack design, light weight. Designed for continuous man portable
3. Wide coverage of 4 Frequencies with high effective power
4. Long jamming Range up to 300-1km.
5. Light Weight and Friendly use
6. Built-In 30minutes battery operation and more batteries can be option
7. Effective segmentation to block each drone controlled signals.
8. Support high gain Directional Antennas
9. Support Remote Control Unit (RCU) with simple set of controls
10. Imported chips, slow start circuit design can avoid the sparking phenomenon caused by mechanical switch, high integration and stable operation.
11. 11. Perfect self-protection function, when the device is overheated, over output -power, standing wave and other fault alarms, the drone signal jammer will automatically cut off the failed module to avoid damage to the drone shield.

Applications:

Any sensitive locations where the drones/UAVs are not allowed to use, like Government, Oilfield, Homeland Security, Large Gathering Place, Counter-terrorism, Ar-my Security, Airport Security, Petrochemical Industry, Sports Venues, VIP Convoy Protection, Schools and Universities etc.