CDS 5528 Bright Resistor 10Lux 10-20KΩ Photoresistor, Spectral Peak 540nm, Suitable For Light-Controlled Switches
A photoresistor is a resistor made of semiconductor material whose conductivity changes linearly with changes in illumination. Photoresistors are widely used in toys, lamps, cameras and other industries.
Schematic
Unit:mm
Performance and features
Epoxy resin encapsulation, good reliability
Small size and high sensitivity
Fast response speed and good spectral characteristics
Application scope
Camera automatic metering Photoelectric control
Indoor light control Alarm
Industrial control Light control switch
Light control lamp Electronic toys
Models and Specifications
Specification | Model | Max Voltage VDC | Max Power consumptionmw | Environment temperature℃ | Spectrum peaknm | Bright resistor(10Lux) KΩ | Dark resistance≥ MΩ | γ100 10 | Response time(ms) | Illuminance characteristic diagram number | |
Rise | Decline | ||||||||||
φ5series | GM5506 | 150 | 90 | -30~+70 | 540 | 2-5 | 0.1 | 0.5 | 30 | 30 | 1 |
GM5516 | 150 | 90 | -30~+70 | 540 | 5-10 | 0.2 | 0.5 | 30 | 30 | 1 | |
GM5528 | 150 | 100 | -30~+70 | 540 | 10-20 | 1 | 0.6 | 20 | 30 | 2 | |
GM5537-1 | 150 | 100 | -30~+70 | 540 | 20-30 | 2 | 0.6 | 20 | 30 | 3 | |
GM5537-2 | 150 | 100 | -30~+70 | 540 | 30-50 | 3 | 0.7 | 20 | 30 | 3 | |
GM5539 | 150 | 100 | -30~+70 | 540 | 50-100 | 5 | 0.8 | 20 | 30 | 4 | |
GM5549 | 150 | 100 | -30~+70 | 540 | 100-200 | 10 | 0.9 | 20 | 30 | 5 |
Measurement conditions
Maximum applied voltage: the maximum voltage that can be continuously applied to the component in the dark;
Dark resistance: The resistance value at the 10th second after turning off the 10Lux light;
Maximum power consumption: Maximum power consumption when the ambient temperature is 25°C;
Brightness resistance: Test value under 10Lux light of standard light source (color temperature 2854K) after irradiation with 400-600Lux light for 2 hours;
γ value: The logarithm of the ratio of the standard resistance value under 10Lux illumination and 100Lux illumination.
Lg (R10/R100)
γ= =Lg(R10/R100)
Lg (100/10)
R10、R100 are the resistance values under 10Lux and 100Lux illumination respectively (the tolerance of γ is ±0.1)
Precautions
1. This product is packed with environmentally friendly materials, with 200 pieces in small packaging and 2,000 pieces in large packaging;
2. Avoid storing this product in humid and high-temperature environments;
3. It should be stored in non-corrosive gas, otherwise the tin plating layer will be oxidized and the solderability will be reduced.
Therefore, it should be used as soon as possible after opening the package.
4. Working environment humidity ≦95%
5. The welding time should be as short as possible; immerse it in 230℃ tin liquid (Sn63 Pb37) to a distance of 5mm from the CdS photoresistor body and maintain it for 3-5 seconds.
6. Note that the lead welding position should be more than 4mm away from the ceramic base.
Light Dependent Resistor (LDR) is a 5mm series photoresistor with a high sensitivity to light and a fast response time. With a peak sensitivity of 540nm and a response time of 30ms for both rise time and fall time, LDR is able to detect even the faintest light sources. The power consumption is only 90mW, and the bright resistor at 10Lux is within the range of 2-5KΩ. LDR also provides a 3mm and 12mm series photoresistor for different applications. With the 5mm lead length, it is the ideal choice for light sensing applications.
Parameter | Value |
---|---|
Product Name | Light Dependent Resistor |
Model | GM5506 |
Lead Length | 5mm |
Power consumptionmw | 90 |
Environment temperature℃ | -30~+70°C |
Bright resistor(10Lux) | (2-5)KΩ |
Dark resistance | 0.2MΩ |
Response time(ms) | Rise 30ms Decline 30ms |
Max VoltageVDC | 150 V |
Spectrum peaknm | 540 |
LINKUN Photoresistor 5506 is the environment-friendly resistance sensor for accurate light detection. It is designed for applications where reliable light measurement is needed, such as outdoor lighting system, solar energy system, and so on. The model number of this photoresistor is GM5506, and it is manufactured by LINKUN, a well-known brand in the electronic industry. This photoresistor features a 5mm lead length, a power consumption of 90 mw, and an operating temperature range from -30 to +70°C. It is also able to detect light accurately with a bright resistor of 2-5KΩ at 10Lux.
LINKUN Photoresistor 5506 is a reliable and cost-effective way to detect light accurately in various applications. This product is available in both 5mm series and 3mm series for different requirements. The 5mm series is suitable for applications with a higher light detection accuracy, while the 3mm series is suitable for applications with a lower light detection accuracy. With its superior performance and reliable quality, LINKUN Photoresistor 5506 is the ideal solution for your light detection needs.
We offer customizable light dependent resistors for your specific needs. Our LINKUN Photoresistor 5506 model is designed for maximum performance and reliability. It has a response time of 30ms and a spectrum peaknm of 540. The maximum voltage VDC is 150V and the lead length is 5mm. We also offer 7mm series photoresistors.
We offer technical support and services for our Light Dependent Resistor products. Our services include:
To get assistance with your Light Dependent Resistor product, please contact us through our website or call our customer service line.
Light Dependent Resistors are packaged in a thermally sealed plastic or metal container and shipped in a box, or on a pallet, depending on the size of the order.
A1: The Brand Name of the Light Dependent Resistor is LINKUN.
A2: The Model Number of the Light Dependent Resistor is Photoresistor 5506.
A3: The Light Dependent Resistor is produced in Dongguan, Guangdong, China.
A4: The range of working voltages for the Light Dependent Resistor is from 0.2V to 0.9V.
A5: The operating temperature range for the Light Dependent Resistor is -30℃ to 80℃.