Working Principle:

The mixing barrel is suspended at the end of the main and driven axles through two Y-type universal joints. The two universal joints intersect and perpendicular to each other in space. When the drive shaft is dragged and rotated, the cardan envoy barrel moves repeatedly in space, such as translation, rotation and roll. Material in the cylinder is followed by three-dimensional compound movement in the axial, radial and circumferential directions. Many kinds of materials in the cylinder flow, diffuse and dope with each other, and evenly show a uniform state.

Special design for PTFE polymer powder mix with fiberglass, graphite, carbon, bronze etc. without temperature rising.

Main parts Technical description

1,The main motor voltage of the device is 380V, and themotorratedoutput power is 1.5kw.

2,The total volume of the mixing barrel is 100L, the effectivevolumeis50L, the standard loading is 50kg (calculated accordingtothematerial pine density 1.0), the device barrel material ismadeofSUS304 stainless steel, the inside and outside of thebarrel ispolished, no mixing dead angle and don’t stick thematerial. Themain shaft of the barrel is installed with reinforcingplateandreinforcing bars for reinforcement treatment.

3,The frame material is steel, the bottom plate is coveredwithA3steelplate so as to clean, the whole interior and exterior of theframeissmooth, the surface lining is used for rust treatment, andthesurface is treated with baking paint.

4,The barrel Angle can be adjusted before discharging(adopt theelectric control barrel out of the material angle). Material inletФ250mm, the lid with double-point single screwcompressiondevice, with good sealing performance, durable in useandeasytooperate. The feed inlet adopt DN100 butterfly valvetocontrol thematerial flow to ensure no dead angle.

5,The main shaft on both ends of the mixing barrel keepsthesamedegree of concentricity. So that the equipment runs smoothlyandcan avoid damage of the bearing, it also can extend theservicelife

6,When mixing, the dynamic balance is good and noimpact. Barrelspeed is greater than or equal to 13r / min. The workingnoiseisunder 65dB.

7 , The reducer adopts the cycloidal gear reducer, themotorandreducer adopt straight line, the reducer and mixingbarrel adoptthe sprocket drive, the transmission part adopts fullyenclosedstructure and has no dust pollution.

8,Mixing time digital setting (0 ~ 99 minutes), timing shutdown.

9 , The electric appliances adopts People Electrical ApplianceandDELIXI Electrical Appliance and the device is controlledfor randomcontrol

10,Equipment overall dimensions: 1500mm*600mm*1200mm.

Part 1 : Equipment Overview

Equipment name: V-type mixer Equipment

model: V-100

Equipment number: one set

Equipment usage: For the mixture of powder

Basic requirements:

1, Each 40-50L material / batch mixing, and do not bring any impurities in the process of mixing.

2, The device barrel material is made of SUS304 stainless steel, the inside and outside of the barrel is polished, no mixing dead angle and don’t stick the material.

3, The equipment design is reasonable and advanced; with smooth operation, good reliability and simple operation; The noise is less than 65db.

Part 2: equipment performance

Equipment technical parameters:

1. Mixing barrel total volume of 100L, Material handling capacity: 40-50L

2, Equipment main motor power 1.5 kw.

3, Mixing time Digital setting 0-99 minutes, timing shutdown.

4, power supply: 380V / 220V / 50Hz.

The application scenario of a PTFE V Type Powder Mixer Machine can vary depending on the specific industry and requirements. However, here are a few common application scenarios:

1. Chemical Industry: PTFE V Type Powder Mixer Machines are often used in the chemical industry for mixing and blending various powders, granules, or solid materials. They are suitable for mixing materials like pigments, dyes, resins, adhesives, and polymers.

2. Pharmaceutical Industry: In the pharmaceutical industry, these machines are utilized for mixing powdered drugs, excipients, and other pharmaceutical ingredients. They ensure homogeneous blending of the components, which is crucial for maintaining product quality and consistency.

3. Food Industry: PTFE V Type Powder Mixer Machines are also used in the food industry for mixing powdered ingredients such as spices, flavorings, food additives, and dry mixes. They provide efficient and uniform blending, ensuring consistent flavor and texture in the final food products.

4. Cosmetics Industry: In the cosmetics industry, these machines are employed for mixing powdered or granulated ingredients used in the production of cosmetics, such as face powders, eyeshadows, blushes, and body powders. They help achieve a smooth and even distribution of the ingredients.

5. Construction Industry: PTFE V Type Powder Mixer Machines can be used in the construction industry for mixing dry construction materials like cement, mortar, plaster, and various additives. They ensure consistent blending and improve the quality of the construction materials.