-
Regularly check the height, cleanliness and temperature of the hydraulic oil.
-
It is recommended to replace the hydraulic oil every six months.
-
Replaced worn seals timely.
-
The mold should be cleaned and maintained in time, and the surface should be coated with a thin layer of protective oil.
-
Carefully handle the temperature sensor of the heating coil, and store it properly.
Maintenance
1. Pump use NO 68 hydraulic oil, after testing machine 40hours,thenopen oil tank to remove all the oil , filter the dirty and cleanoil tank,thenfilling clean oil once again, change the oil every year.
2. Oil seals should change when found leakage after sometimelater, liftcylinder piston to top limit when change the seals, useroller supportworking table ,loose bolt between board and working table,press“closemould” button, fix joint board on lift working table ,press “openmould”button ,let piston drop to bottom limit, take out old seals ,put newseals(note: lip down, do not damage it) then crawl “slowspeed” bottom,cylinder piston raise slowly , keep seals fit inside completely, andfixboltonce again.
3.To check all joints of electrical system normal, when contact pointsappear copper black ,use fine sandpaper to remove, fix all wirescrewtightly after 3 days.
Process Guidance
-
Due to the special technology of the equipment, customers can go to the factory to learn about the installation, commissioning, operation, mold change, maintenance, process guidance of the equipment for free before delivery.
-
If you are unable to come to our company to study due to inconveniences such as distance, personnel, time, we can arrange for engineers to come to guide the installation, commissioning, operation, mold replacement, maintenance, and process guidance of the equipment under the agreement of the other party.
-
We can also conduct remote guidance. Users can choose other methods such as telephone, video, email, etc. to learn about equipment installation, commissioning, operation, mold change, maintenance, process guidance, etc.of the equipment.
The advantages of a Polymer PTFE Rod Ram Horizontal Extruder Machine include:
- High production efficiency: The machine is designed to extrude Polymer PTFE rods horizontally, allowing for continuous and efficient production.
- Precise control: The machine is equipped with advanced control systems that ensure precise control over the extrusion process, resulting in consistent rod dimensions and quality.
- Versatility: The machine is capable of extruding Polymer PTFE rods of various diameters and lengths, making it suitable for a wide range of applications.
- Easy operation: The machine is designed with user-friendly controls and interfaces, making it easy to operate and control the extrusion process.
- Low maintenance: The machine is built with high-quality materials and components, reducing the need for frequent maintenance and ensuring long-term durability.
- Energy efficiency: The machine is designed to minimize energy consumption, making it cost-effective and environmentally friendly.
- Safety features: The machine is equipped with safety devices and mechanisms to ensure operator safety during the extrusion process.
- Customization options: The machine can be customized to meet specific production requirements, allowing for flexibility and adaptability.
After Sales Service
-
From the date of receiving the machine, the warranty period of all machine accessories is one year. We provide free maintenance guidance service during the warranty period.
-
If there is any problem with the accessories outside the warranty period, please contact us in time to explain the problem, and we will provide follow-up resolution within 24 hours.
-
If we have a local distributor, we can contact the local distributor for cooperation.
-
All questions about the equipment can be consulted to us by mail, video, telephone, etc.
Service Phone:+86-0519-83999079
PTFE Rod Line Automatic Feeding Equipment
Vacuum automatic feeding, including compressed air reverse blowing system, start feeding system, wash hose, suction gun, vacuum generator, PCB controller,throughput 30-300 kg/h, diameter 150mm and height 600mm, set automatic feeding time and discharging time, powder flow is controllable, all stainless steel production, intelligent control.
The mixing barrel is 600mm in diameter and 700mm in height, with a 2.2kw reduction motor, a stirring speed of 15-25 turns/min, 8-10mm thick bottom plate, and a feeding capacity of 75-90kg.
Technical Parameters:
| Model | Compressed air consumption | Air pressure |
| SKVQC-10 | 180L/min | 0.4-0.6MPa |
Related Optional Equipments
