Anti-Corrosion Fluoropolymer Resin / 29Mpa PFA Resin For Heat Exchanger

Quick Detail:

A. aging resistance

B. radiation resistance

C. low permeability

D. high pressure resistance

E. oil resistance

F. anti-corrosion

G.Flame retardation.

Description:

PFA resin its chemical stability properties, physical and mechanical performance,

electrical insulating properties, lubricity, not sticky, aging and incombustible are very fine, all and assembled

tetrachloroethylene similar. Also has the same tetrachloroethylene and assembled the thermal stability,

PFA resin is suitable for electrical and electronic industry insulating layer, high frequency and uhf wire

insulation, electronic devices, insulation parts cable insulation and sheath, connector plug,bearing

insulation, printed circuit boards, electrostatic megaphone to use membrane, etc. Especially the small

size thin-wall insulation line, its processing speed is more then general PTFE twined materials many times

Applications:

PFA resins can widely used in:

1. Heat exchanger,

2. Steam pipe,

3. High purity reagent pipeline,

4. All kinds of corrosive medium (harsh solvents) pipe,

5. Wiring insulation jacket.

6. Detailed fluorine rubber ring plastic pipe.

7. Ultra high frequency electrical wiring insulation,

8. Electronic devices,

9. The connector plug,

Technical Parameter:

Remarks:

You may interested in our other products just like PVDF resin,FEP resin and PTFE resin, etc.

Competitive Advantage:

1.Excellent Chemical property

2.Virgin and recycled materials available

3.Any sizes available

4.Fast Usually

Product usage:

BC001: Mainly used for piping, pump, valve, tank lining, diaphragm, joint part, bearing, etc；

BC002: Mainly used for pipe, wire insulation layer, thin films, and various parts;

BC003: Used for general-purpose plastics extrusion processing, mainly used for cable insulation wire,

multiconductor cable sheath, etc.;

BC004:Mainly used in aviation, aerospace industry, chemical industry,used for faster cabel extrusion,

　　　 and it is more economical for most purposes without stress cracking resistance.