Levis ladies' red pleather biker zip through jacket with epaulets and branded poppers on shoulder LEDO1717
Description
Collar:
To have a 4cm mandarin collar with a polished sliver branded popper with edge stitching around.
The inside collar to have the dtm rib
CF:
Center front zip to be 5 guage polished sliver zipwith branded puller. Zip to start at bottom of collar stand and run down to bottom hem.
To have 4cm width placket and have 4 branded poppers.
C/F to be footstitch at both sides.
Shoulder:
Shoulder have cutline and epaulets as per CAD..
Shoulder panel to be footstitched on back seam and epqulets to have edge stitching.
Body:
To have slant chest zip pockets at both LSW and RSW with edge stitching.
The zip to be 11cm long with branded puller and edge stitching.
Lower side pockets to be inserted as per CAD. To have vertical welt pocket opening with concealed
popper.
Pocket welts to be 15cm long x 2cm wide with edge stitching around outside.
To have a separate 4.5cm wide waistband with footsitching at both sides at top and bottom.
Sleeves:
Long sleeves to have a vertical cutline in back as per CAD. Seam to be foot stitched.
To have another cutline and stiching underarm without stitching.
Sleeves to have 2cm edge stitching at cuff opening.
Back:
no cutline and stitching.
Inside:
To have navy printed 210T lining on body and DTM 210T on sleeve.
To have half moon patch at inside back neck.
Branding:
Levis main label at inside back neck and size label in collar seam.
The red Levis label at LWS side seam
SKETCH
STITCHING
Specification