Ladies' zip through grey melange detachable hooded ink pleather biker jacket TW77349
Description
Shell fabric
|
100%PU/Polyurethane with 100%viscose base, 310-330gsm |
Lining
|
DTM 210T |
Hood
|
Grey melange brushed fleece, 100%polyester |
Hood lining
|
100%polyester single jersey |
Trims list
Trim | Position | quantity | Size | Color |
Metal zip
|
CF, side pocket, chest pocket | 5 | #5 | gunmetal |
branded Puller
|
CF, side pocket, chest pocket | 5 | gunmetal | |
branded Popper
|
collar | 1 | 1.5cm | gunmetal |
Toggles
|
hoold | 1 | grey | |
Plastic button
|
inner collar | 5 | 1cm | DTM ink |
Styling Details:
Front:
- Styling to 4cm wide mandarin collar with edge stitching and branded popper.
- #5 gunmetal center front zip with multi stitching on the 2.8cm wide either side patch, exposed DTM zip tape with branded puller.
- Shoulder patch to have triple stitching at front and back and have decorative 3mm binding insertion as per image.
- To have 2x cutline on each side of front and triple needle stitching.
- To have non-functional chest #5 gunmetal zip pocket and edge stitching, with exposed DTM zip tape and branded puller.
- To have slanted functional side pockets with #5 zip in gunmetal color with exposed DTM zip tape and branded puller, edge stitched for the pocket.
- Waistband to be 5cm wide twin needle stitching at top and bottom of hem.
- Hood to be 260g brushed fleece in grey melange color and lined with single jersey DTM lining.
- Hood to be normal 3 pieces with footstitching.
- Hood to have DTM drawcord with DTM eyelets and plastic tips
- To be attached on the inside of the collar with DTM navy buttons
Sleeves:
- With vertical cutline at front and bck with triple needle stitching.
- To have cutline without stitching under armhole.
- To have 16cm wide 3mm binding insertion and stitching details as per on the shoulder.
Back:
- To have center back opening seams and stitching.
- To have 2x vertical cutlines and triple stitching seams on the either side as image.
- To have CB inset with horizontal 9x stitch lines detail
Inside:
To be fully lined DTM 210T superfine lining.
Hanger loop with shell fabric.
Branding:
OBR branded trims
All metal hardware to be branded and gunmetal color.
Spec
MEASUREMENTS | Tolerances | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 40 | 42 | 44 |
Collar Depth @ Centreback Neck | 0/0 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
Collar Length - Top Edge to tip end | 5/5 | 42.6 | 42.6 | 43.4 | 44.2 | 45 | 46.2 | 47.4 | 48.6 | 49.8 | 51 |
Across Back Neck (HSP to HSP) | 5/5 | 15.8 | 15.8 | 16.2 | 16.6 | 17 | 17.6 | 18.2 | 18.8 | 19.4 | 20 |
Across Front Mid-Armhole or Yoke | 5/5 | 30 | 31 | 32 | 33 | 34 | 35.2 | 36.4 | 37.9 | 39.4 | 40.9 |
Across Back Mid-Armhole or Yoke | 5/5 | 31 | 32 | 33 | 34 | 35 | 36.2 | 37.4 | 38.9 | 40.4 | 41.9 |
Half Bust at Underarm | 5/5 | 38 | 40 | 42 | 44 | 46 | 48.5 | 51 | 54 | 57 | 60 |
Half Waist (41cm down) | 5/5 | 31 | 33 | 35 | 37 | 39 | 41.5 | 44 | 47 | 50 | 53 |
Half Hem Width - Straight Across | 5/5 | 38 | 40 | 42 | 44 | 46 | 48.5 | 51 | 54 | 57 | 60 |
Shoulder Seam ex Neck Trim | 5/5 | 10.1 | 10.1 | 10.4 | 10.7 | 11 | 11.3 | 11.6 | 11.9 | 12.2 | 12.5 |
Long Sleeve Length (including Cuff) | 5/5 | 60.8 | 60.8 | 61.2 | 61.6 | 62 | 62.4 | 62.8 | 63.2 | 63.6 | 64 |
Half Armhole (Diagonal) | 5/5 | 18.6 | 18.6 | 19.4 | 20.2 | 21 | 21.8 | 22.6 | 23.4 | 24.2 | 25 |
Half Bicep at Underarm Pt | 5/5 | 14.6 | 14.6 | 15.4 | 16.2 | 17 | 17.8 | 18.6 | 19.4 | 20.2 | 21 |
Half Cuff Width (Long) | 0/0 | 9.5 | 10 | 10.5 | 11 | 11.5 | 12 | 12.5 | 13 | 13.5 | 14 |
Front Length (from HSP) | 10/10 | 55 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 |
C/Back Length from Neck Seam | 10/10 | 53 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 |
Chest Pocket Position from NSP | 5/5 | 15.5 | 15.5 | 16 | 16.5 | 17 | 17.5 | 18 | 18.5 | 19 | 19.5 |
Zip Length | 0/0 | 48 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 |
Specification