Dockers Men'scharcoal plastic zip through pleather jacket with sherpa lining DOCO1714
Description
shell fabric |
100%PVC
|
Body lining |
Beige color sherpa, 100%polyester
|
Sleeve lining |
DTM 100%polyester
|
Collar:
To have polo collar with foot stitching, the collar height at center back is 7cm with and 3cm collar stand.
To have the double D ring and tab at front collar.
CF:
Center front zip to be 5 guage antique nickle plastic zip with branded puller. Zip to start from bottom of collar stand and run down to bottom hem.
Shoulder:
To have shoulder cutline and foot stitching.
Body:
To have CF plastic #5 zip with piping and footstitching.
To have anchor embroidery on the LSW chest area as CAD.
Bottom pockets to beslant welt pocket with flap and branded popper.
To have edge stitching around the welt pocket and footstitching for the flap. The flap to be 18cm x 6.5cm.
To have laid on 5cm hem with foot stitching.
Sleeves:
Long sleeves to have vertical cutline at back as per CAD with foot stitching.
To have cutline and stiching underarm without stitching.
To have laid on cuff and adjustable branded popper.
Back:
To have 18cm height back yoke with foot stitching.
Inside:
Body lining with beige sherpa and sleeve lining in DTM 210T.
To have main label patch with shell fabric .
To have hanger loop with shell fabric.
Branding:
Dockers main label at inside back neck and size label at bottom of main label patch.
All trims color to be antique nickle.
The thread stitching color to be DTM.
SKETCH
STITCHING
Specification