All brass Hot And Cold Water Triangle Valve Flow Control Valve Three-way Valve G1/2 Thread Bathroom Angle Valve

Toilet basin faucet universal anti-back flow copper angle valve 4-point extension hot and cold water triangular valve

Hot and cold water triangle valve
Flow control valve
Three-way valve G1/2
Threaded bathroom angle valve
Stainless steel angle valve
Toilet triangle valve

Material: copper ;

packing: carton;

packing size: 10.8 * 5.5 * 4.8cm
Selling points: high quality stainless steel, rust and corrosion resistant, durable;
Two colors are easy to distinguish, blue represents cold water pipeline and red represents hot water pipeline;
Applicable to: bathroom sink, toilet, water heater, sink, etc .;
Simple installation, squeeze clockwise to tighten. When installing, place a suitable amount of bare tape on the thread at the front of the angle valve to adjust the angle of use of the angle valve;

APPLICATION RANGE

1. Sealing and fixing ring; to ensure long-term stable operation of the valve core

2. Ceramic plate (Control water flow accuracy)

3. Sealing ring

4. Sealed fixed ring; guaranteed to be used for 20 years

The copper alloy gravity forging is preferred; it is resistant to pressure and explosion, with full materials; it is safe and resistant to pressure; it can easily cope with long-term harsh environments.

Lengthened thread design; increase raw material friction; stable and non-slip;

The blue cold water triangle valve is equipped with a water backflow prevention valve; it is more suitable for the water backflow phenomenon of the toilet.

Installation steps:

1. Arrange the water inlet pipe at a suitable height on the wall;
2; Wrap an appropriate amount of raw material tape on the thread of the inlet pipe; set the decorative cover and screw into the inlet pipe;
3. Use screws to insert the water outlet; screw the water inlet end into the wall inlet pipe;
4. Connect the pipeline water source; check whether the threaded part is sealed;