0.95-1.14m/Min Pulse Bag Filter For Sawdust Woodworking Machine

product description

Under the action of the system exhaust fan, the dust-containing airflow enters the pre-collection chamber of the dust collector from the dust suction air outlet, and the dust-containing airflow hits the baffle and flows to the ash hopper. At the same time, the speed slows down, which is due to inertia and dust. Down, the coarser particle dust directly falls into the ash hopper and is discharged from the ash discharging mechanism, which plays a role of pre-collection. Other lighter dust is adsorbed on the surface of the filter bag with the airflow, and the clean gas is filtered From the air outlet pipe row of the upper box, as the filtering conditions continue, more and more dust accumulates on the surface of the filter bag, and the operation resistance of the equipment becomes larger. Pulse cleaning must be used to cut off the outlet of any room first. Channel, and then pulse cleaning and after a few seconds of natural settlement, so that the dust is completely removed.

Techinal parameters

Equipment advantages

1. The cleaning intensity is higher, and the air inlet and outlet are evenly distributed.
2. The dust collection efficiency is higher, up to 99.8%.
3. The service life of the filter bag is effectively extended.

Details

1. The structure of Xinchen XMC sub-chamber pulse bag filter:
△ Box body: bag room, pre-cleaning room, clean air room, perforated plate, filter bag, filter bag frame, the box body is designed to withstand a pressure of 9000Pa, which is greatly improved compared with the conventional bag filter;
△ Injection system: main air pipe, injection pipe, pulse valve, control device, use PLC or special pulse program controller automatic control device, according to the nature of dust and working environment, reasonably adjust the cleaning cycle and pulse spray time to maximize the dust collector Ideal cleaning effect;
△ Ash hopper and ash discharge part: divided into direct connection form, ash hopper is connected with ash discharge valve through conveying equipment;
2. According to the change of working environment, Xinchen XMC sub-chamber pulse bag filter is matched with solenoid valves of different specifications to adapt to a variety of complex dust removal environments. Even in the particularly cold northeast and northwest regions or when the flue gas is below zero, the heat preservation and heating device needs to be added, and the shell only needs to be changed slightly without replacing new equipment, which saves a lot of investment costs for users.
3. Reasonable box structure and automatic control series effectively improve the working efficiency of the XMC sub-chamber pulse bag filter. During the working process, the dust-containing gas enters the expanded ash hopper of the dust collector for pre-collection, and is evenly distributed through the deflector. Between each filter bag, the dust is retained on the outer surface of the filter bag. In order to make the equipment resistance not exceed 1200Pa, the high-pressure gas is pulsed through the solenoid valve, so that the compressed air (0.5~0.7MPa) in the air bag is blown by the hole of the nozzle The sprayed (called primary air) induces several times the surrounding air (called secondary air) through the venturi tube into the filter bag and rapidly expands in an instant, and shakes off the dust along with the opposite direction of the airflow to achieve a clean dust. purpose.
4. The filter bag of Xinchen XMC sub-chamber pulse bag filter is generally made of polyester needled felt, and the allowable temperature can reach 120℃. If the filter bag adopts the high temperature of Metas above the allowable temperature of the filter material, the exhaust gas enters the dust collector. Cooling measures should be taken before. This series of dust collectors has nine specifications: 60-2, 60-3, 60-4, 60-5, 60-6, 70-5, 70-6, 70-7, 70-8. The specific performance parameters are as follows:

Pictures