Manufactory Direct Adhesive Tape Yellow Solid Block PSA Hot Melt Adhesive WANLI® TPR-2206P with Viscosity About 8500 mpa·s (170℃) & About 13000mpa·s (160℃) And High Viscosity, High Peeling Strength, Excellent Aging Resistance.
Wanli® pressure sensitive hot melt adhesive TPR-2206P for adhesive tape is a TPR(Thermoplastic Rubber) synthetic rubber based hot melt adhesive. TPR-2206P is specifically developed for kraft paper adhesive tape & foam adhesive tape. TPR-2206P is featured high viscosity, high peeling strength, excellent aging resistance.
APPLICATION
Wanli® PSA pressure sensitive hot melt adhesive TPR-2206P is used for kraft paper adhesive tape & foam adhesive tape.
Application Material | Adhesive Tape |
Appearance | Yellow Block |
Component | TPR |
Application Industry | Adhesive Tape |
Solid Content | 100% |
Operating Temperature | 150~180 ℃( Depend On Equipment, Substrate, Environment And Other Conditions) |
Softening Temperature | About 95℃ |
Melt Viscosity | About 8500 mpa·s (170℃) About 13000mpa·s (160℃) |
Peeling @180˚ | About 40.0N/2.5cm/55μm Stainless Steel Plate |
Lasting Adhesive | ≥72H |
Usage Scope | Kraft Paper Adhesive Tape & Foam Adhesive Tape |
Shelf Life | 1 Year |
Package | 20Kg/Carton |
FEATURE
High viscosity.
High peeling strength.
Good aging resistance.
USER GUIDE
TPR-2206P is suitable for standard hot melt adhesive application equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 150℃~180℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store the product where it’s dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.