Good Quality Factory Directly 100% Yellowish Solid Block, Car Floor Mats Lamination PSA Hot Melt Adhesives WANLI® TPR-7212BW And High Viscosity, High Peeling Strength
Wanli® pressure sensitive hot melt adhesive TPR-7212BW for vehicle interior decoration is a TPR(Thermoplastic Rubber) synthetic rubber based hot melt adhesive. TPR-7212BW is specifically developed for car floor mats lamination. TPR-7212BW is featured high viscosity, high peeling strength, good aging resistance.
APPLICATION
Wanli® PSA pressure sensitive hot melt adhesive TPR-7212BW is used for car floor mats lamination.
Application Material | Car Floor Mats Lamination Bonding |
Appearance | Yellowish Solid Block |
Component | TPR |
Application Industry | PSA Hot Melt Adhesive for Vehicle Interior Decoration |
Solid Content | 100% |
Operating Temperature | 160~185 ℃( Depend On Machine, Substrate, Environment And Other Conditions) |
Softening Temperature | About 124℃ |
Melt Viscosity | About 16000mpa·s (180℃) ; About 45000mpa·s (160℃) |
Peeling @180˚ | ≥30N/2.5cm/65μm/ Stainless Steel Plate |
Ring Initial Viscosity | ≥25N/2.5cm/65μm |
Lasting Adhesive | ≥120H |
Usage Scope | Car Floor Mats Lamination |
Shelf Life | 1 Year |
Package | 20Kg/Carton |
FEATURE
High viscosity.
High peeling strength.
Good aging resistance.
USER GUIDE
TPR-7212BW is suitable for standard hot melt adhesive application equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 160℃~185℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store the product where it’s dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.