Good Quality Factory Directly Low Cost Pressure Sensitive Hot Melt Adhesive WANLI® TPR-4376A with Viscosity About 9500mpa·s (170℃) for Application of Waybill & Waybill Seal Bonding
Wanli® pressure sensitive hot melt adhesive TPR-4376A for waybill is a TPR(Thermoplastic Rubber) synthetic rubber based hot melt adhesive. TPR-4376A is specifically developed for waybill label and waybill seal bonding. TPR-4376A is featured high viscosity, high peeling strength, good aging resistance. Suitable working on standard machine systems such as slit squeegee, roller glue, spray glue etc.
APPLICATION
Wanli® pressure sensitive hot melt adhesive TPR-4376A is used for waybill label and waybill seal bonding.
Application Material | Waybill & Waybill Seal Bonding |
Appearance | Yellow Solid Block |
Component | TPR |
Application Industry | PSA Hot Melt Adhesive for Waybill Label & Waybill Seal Bonding |
Solid Content | 100% |
Operating Temperature | 150~180 ℃( Depend On Machine, Substrate, Environment And Other Conditions) |
Softening Temperature | Around 99 ℃ |
Melt Viscosity | Around 9500mpa·s (170℃) |
Ring Initial Viscosity | Around 30N/2.5cm (Measured at 23℃ and 25g/ m2 on PET) |
Peeling @180˚ | Around 25.0N/2.5cm/ Stainless Steel Plate |
Lasting Adhesive | ≥48H |
Usage Scope | Waybill Label & Waybill Seal |
Shelf Life | 1 Year |
Package | 20Kg/Carton, 500Kg/Carton |
FEATURE
High viscosity.
High peeling strength.
Good aging resistance.
USER GUIDE
TPR-4376A is suitable for standard hot melt adhesive application equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 150℃~180℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store the product where it’s dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.