Genine Yellow Solid Block Hot Melt Adhesives for Waybill Label & Waybill Seal Bonding Factory Direct Supply
TPR-4376A
Wanli® pressure sensitive hot melt adhesive TPR-4376A for waybill is a TPR (Thermoplastic Rubber) synthetic rubber based hot melt adhesive. TPR-4376A is specifically developed for waybill label and waybill seal bonding. TPR-4376A has high viscosity, high peel strength, and good aging resistance.Suitable working on standard machine systems such as slit squeegee, roller glue, spray glue etc.
APPLICATION
Wanli® pressure sensitive hot melt adhesive TPR-4376A is mainly used for the bonding of waybill labels and waybill seals.
Application Material | Waybill & Waybill Seal Bonding |
Appearance | Yellow Solid Block |
Component | TPR |
Application Industry | Waybill Label & Waybill Seal Bonding |
Solid Content | 100% |
Operating Temperature | 150~180 ℃ |
Softening Temperature | About 99 ℃ |
Melt Viscosity | About 9500mpa·s (170℃) |
Ring Initial Viscosity | About 30N/2.5cm (Measured at 23℃ and 25g/ m2 on PET) |
Peeling @180˚ | About 25.0N/2.5cm/ Stainless Steel Plate |
Lasting Adhesive | ≥48H |
Curing | Normal Temperature Curing |
Usage Scope | Waybill Label & Waybill Seal |
Shelf Life | 1 Year |
Package | 20Kg/Carton, 500Kg/Carton |
FEATURE
High viscosity.
High peeling strength.
Good aging resistance.
USER GUIDE
It is suitable for standard hot melt adhesive application equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 150℃~180℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store the product where it’s dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.