New Style Waybill & Waybill Seal Bonding Hot Melt Adhesives in Yellow Solid Block Chinese Factory
TPR-433
Wanli® pressure sensitive hot melt adhesive TPR-433 for waybill is a TPR(Thermoplastic Rubber) synthetic rubber based hot melt adhesive. TPR-433 is specifically developed for waybill label and waybill seal bonding. TPR-433 is featured high viscosity, high peeling strength, good aging resistance. Suitable working on standard machine systems such as slit squeegee, roller glue, spray glue etc.
APPLICATION
Wanli® pressure sensitive hot melt adhesive TPR-433 is used for waybill label and waybill seal bonding.
Application Material | Waybill & Waybill Seal Bonding |
Appearance | Yellow Solid Block |
Component | TPR |
Application Industry | Waybill Label & Waybill Seal Bonding |
Solid Content | 100% |
Operating Temperature | 150~180℃ |
Softening Temperature | About 99 ℃ |
Melt Viscosity | About 10000mpa·s (160℃) |
Ball Initial Viscosity | About 10# (Measured at 23 ℃ and 35g/ m2 on PET) |
Peeling @180˚ | About 15.0N/2.5cm/ Stainless Steel Plate |
Curing | Normal Temperature Curing |
Usage Scope | Waybill Label & Waybill Seal |
Shelf Life | 1 Year |
Package | 20Kg/Carton |
FEATURE
With high viscosity.
High peeling strength.
Good aging resistance.
USER GUIDE
TPR-433 is suitable for standard hot melt adhesive application equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 150℃~180℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store TPR-433 where it’s dry, cool and avoid direct sunlight. The storage temperature should not exceed 35℃ and avoid open flame or heat source.