COMBINEDWITH UP TO DATE TECHNOLOGY AND OUR KNOWLEDGE WITH BATTERIES, TRIDENT SMART BATTERY CHARGER WAS ESPECIALLY DESIGNED FOR MOBILE AND MARINE APPLICATION, IT WAS AN IDEAL SOLUTION FOR YOUR BATTERY CHARGING ON BOARD.
Features :
TBB premium II multi stage adaptive charging algorithm for lead acid battery
Fitted with multistage charging algorithm (bulk‐absorption‐float‐recycle), BS battery charger
is designed to charge battery quickly and fully. Microprocessor controlled charging algorithm
with variable absorption charging timer guarantee the optional charging for batteries of
different discharged state.
Float charging and Recycle charging program guarantee your battery could get proper
maintenance in case of long time connected
BS Charger can be installed on a horizontal surface or vertically on a wall. Please see following instruction;
Specs
Model | BS1210 | BS1225 | BS1240 | BS1225-3 | BS1240-3 |
Electrical | |||||
Output voltage (PS mode) (Vdc) | 12.8V±0.256Vdc | ||||
Max Output current (A) | 10 | 25 | 40 | 25 | 40 |
Nominal input voltage (Vac) | 85-265VAC,50/60Hz | 165-265VAC,50/60Hz | |||
Charge algorithms | 5 steps. soft start, bulk, absorption, float, recycle | ||||
Temperature compensation | Automatically | ||||
Absorption voltage(Vdc) | AGM:13.5V,GEL:13.5V,LFP:13.5V,WET:13.7V | ||||
Floating voltage (Vdc) | AGM:14.4V,GEL:14.1V,LFP:14.4V,WET:14.7V | ||||
Charging current (A) | 10 | 25 | 40 | 25 | 40 |
Min battery voltage (Vdc) | 1 | 2 | |||
Efficiency | 88% | ||||
Input connector | Cable of 1.5 meter with CEE 7/7 plug | IEC socket | |||
Output connector | Fixed cable,2.5mm², 1 meter | M4 Screw (16mm²) | |||
Output | 1 | 1+1 | |||
Ripple noise | ≤200mVp-p | ||||
Regulation Accuracy | ≤2% | ||||
Cooling | Self cooling | Fan cooling | |||
Working Temperature | -20℃ -- +60℃ | ||||
Protection | |||||
Short circuit | Shutdown output, automatically restart when short circuit is removed | ||||
Reverse polarity | No charging | ||||
Charger over temp | Shut down the charger | ||||
Battery over temp | Shut down the charger | ||||
Standards | |||||
LVD | EN60335-1,EN60335-2-29 | ||||
EMC | EN55014-1,EN55014-2,EN61000-3-2,EN61000-3-3 | ||||
Structure | |||||
Out case | Aluminum+plastic | ||||
Dimension | 175*114*53mm | 249*165*74mm | 249*165*74mm | ||
Weight | 1.0KG | 1.6KG | 1.6KG | ||
IP class | IP20 | IP23 | |||
Insulation Resistance | ≥50MΩ | ||||
Dielectric strength | I/P-O/P:3.0KV,I/P-PG:1.5KV,O/P-PG:0.5KV |
Installation