90% Efficiency car battery inverter On Board 12V 1500w Inverter low Noise
eRAY pure sine wave inverter
Please do the correct configuration for voltage and frequency by dip switch before installing the inverter. The default factory setting is 230VAC50HZ
eRAY inverter could supply a steady pure sine wave AC to various load on board,
such as coffee machine, microwave, hairdryer or sensitive electronics. It could bring
home comfort and convenience for your life or work on board, either motor home or
utility vehicle.t delivers a vast amount of energy yet takes up very little space!
Features
Power saving threshold settable.
When the load is less than the power-saving threshold setting value, the inverter automatically enters the power saving mode to reduce the static the static power consumtion, thereby saving battery power.
AC output Socket Type: European/multi-functional-Australian-UK-Universal type as below pictures.
Product Drawing
Specifications
Model No. | IH1500L | IH2000L | |
DC input | |||
Nominal voltage | 12VDC | ||
Voltage range | 10.5~16VDC | ||
Input under-voltage protection | 10.0±0.5VDC | ||
Input under-voltage alarm | 10.5±0.5VDC | ||
Input under-voltage recovery | 12.6±0.3VDC | ||
Input over-voltage protection | 16.5±0.5VDC | ||
No load current @12VDC | < = 1.1A | < = 1.5A | |
Power saving mode @12VDC | < = 0.3A | < = 0.3A | |
Current when power off | < = 3mA | < = 3mA | |
AC output | |||
Continuous output power @35℃ | 1500W | 2000W | |
Maximum output power (1min) | 1530W-1670W | 2100W-2200W | |
Surge power | 4500W | 6000W | |
Output voltage | 230Vac± 3% , 220/230/240 DIP swtich Settable | ||
Output frequency | 50/60±0.5Hz DIP swtich Settable | ||
Output waveform | Pure sine wave | ||
Total harmonic distortion | <3% @ Nominal load | ||
Short circuit protection | <5s,auto-restart | ||
Efficiency (Max.) | 90% | ||
DC output | |||
Output voltage | 5 ± 0.25VDC | ||
Maximum output current | 2A | ||
Protection | |||
Input protection | Over / under voltage protection, Reverse polarity (interner fuse) | ||
AC output protection | Over load , Short circuit | ||
Others | Over temperature | ||
Other Data | |||
Recommended Battery cable | #1 (35mm2) | #1/0 (50mm2) | |
AC output connector | Sockets | ||
DC output connector | USB socket 1 | ||
Remote LCD panel | Optional ,RJ45 port,4m cable | ||
Communication | RS485 | ||
Enclosure | Aluminum | ||
Dimension (mm) (max) | 351*240*110 | 351*240*110 | |
Net weight (KGs) | 4.3KGS | 4.5KGS | |
Cooling | Temperature and load controlled Fan | ||
Noise | <55dB | ||
Protection | IP20 | ||
Safety & EMC | |||
Safety | EN60950-1 | ||
EMC | EN61000-4-2 , 3 , 4 , 5 , 6 , 8 ,11; EN61000-3-2, -3-3 ; EN55022 Class B; EN55024; | ||
E-mark | CISPR25; ISO7637-2 | ||
Environment | |||
Operating Ambient Temperature | -20 to 40°C | ||
Storage Temperature Range | -30 to 70°C | ||
Storage humidity | 10~95% RH, |
Installation Location:
Please install the equipment in a location of Dry, Clean, Cool with good ventilation
Working temperature:-20~40℃
Storage temperature:-30-70℃
Relative Humidity:10%-95%,non-condensing
Cooling: Forced air
Wiring Recommendation
Please find the following minimum wire size 50mm2. In case of DC cable longer than 3m,
please increase the cross section of cable to reduce the loss.
Caution!
Please do the correct configuration for voltage and frequency by dip switch before stalling theinverter