Smart RV charger used in moving cars power supply curren 12Vdc 10A 40A 10A
AGM,battery BS1240 converter charger automatice voltage compensation charging
TBB TRIDENT series Smart battery charger on board charging for mobile marine application
TBB premium II multi stage adaptive charging algorithm for lead acid battery, fitted with multistage charging algorithm( bulk-absorption-float-recycle), BS battery charger is designed to charge battery quickly and fully. Mircroprocessor controlled charging algorithm with variable absorption charging timer auarantee the optional charging for batteries of differernt discharged state.Float charging and recycle charging program guarantee your battery could get proper maintenance in case of long time connected
Voltage compensated charging
Through the battery temperature and voltage sensor, BS charger could automatically adjust its
output compensating the voltage drop on the cable assuring the full charging through
delivering the right voltage to battery.
Features :
TBB premium II multi stage adaptive charging algorithm for lead acid battery
Fitted with multistage charging algorithm (bulk‐absorption‐float‐recycle), BS battery charger
is designed to charge battery quickly and fully. Microprocessor controlled charging algorithm
with variable absorption charging timer guarantee the optional charging for batteries of
different discharged state.
Specs
Model | BS1210 | BS1225 | BS1240 | BS1225-3 | BS1240-3 |
Electrical | |||||
Output voltage (PS mode) (Vdc) | 12.8V±0.256Vdc | ||||
Max Output current (A) | 10 | 25 | 40 | 25 | 40 |
Nominal input voltage (Vac) | 85-265VAC,50/60Hz | 165-265VAC,50/60Hz | |||
Charge algorithms | 5 steps. soft start, bulk, absorption, float, recycle | ||||
Temperature compensation | Automatically | ||||
Absorption voltage(Vdc) | AGM:13.5V,GEL:13.5V,LFP:13.5V,WET:13.7V | ||||
Floating voltage (Vdc) | AGM:14.4V,GEL:14.1V,LFP:14.4V,WET:14.7V | ||||
Charging current (A) | 10 | 25 | 40 | 25 | 40 |
Min battery voltage (Vdc) | 1 | 2 | |||
Efficiency | 88% | ||||
Input connector | Cable of 1.5 meter with CEE 7/7 plug | IEC socket | |||
Output connector | Fixed cable,2.5mm², 1 meter | M4 Screw (16mm²) | |||
Output | 1 | 1+1 | |||
Ripple noise | ≤200mVp-p | ||||
Regulation Accuracy | ≤2% | ||||
Cooling | Self cooling | Fan cooling | |||
Working Temperature | -20℃ -- +60℃ | ||||
Protection | |||||
Short circuit | Shutdown output, automatically restart when short circuit is removed | ||||
Reverse polarity | No charging | ||||
Charger over temp | Shut down the charger | ||||
Battery over temp | Shut down the charger | ||||
Standards | |||||
LVD | EN60335-1,EN60335-2-29 | ||||
EMC | EN55014-1,EN55014-2,EN61000-3-2,EN61000-3-3 | ||||
Structure | |||||
Out case | Aluminum+plastic | ||||
Dimension | 175*114*53mm | 249*165*74mm | 249*165*74mm | ||
Weight | 1.0KG | 1.6KG | 1.6KG | ||
IP class | IP20 | IP23 | |||
Insulation Resistance | ≥50MΩ | ||||
Dielectric strength | I/P-O/P:3.0KV,I/P-PG:1.5KV,O/P-PG:0.5KV |
Installation
BS Charger can be installed on a horizontal surface or vertically on a wall. Please see following instruction;