TBB TP600 series inverter could achieve a compact size of maximized power density. Here are the Features;
- 19”1U or 19”2U
- High Frequency standby design with
- Transfer time 5-8ms
- Working mode selectable (AC priority or DC priority)
- High Frequency design
- DC/AC isolation improving system security
- System parameters programmable
- Complete protection
- Thermal controlled fan
- RS232 or RS485 communication port and Dry point
- Voltage adjustable 230Vac (200-240) or 110Vac (100-120)
- Front panel connection version available
Led Shows
Overload LED is illuminating,in case small overload (within the nominal overload capability), buzzer beeps once every 2sec without cutoff output. In case of heavy overload exceeding the nominal capability, buzzer continually beep without output and failure LED is illuminating.
Specifications
TP600M and TP600S (24VDC/48VDC models)
Model | TP610 | |
Electrical | ||
DC input | 24Vdc | |
Dc input range | .-17% ~ +25% | |
AC Input | ||
AC input | 230Vac (-25%~+20%) | |
Frequency range | ±10% | |
Output power | 1kva | |
Wave form | Pure sine wave | |
Power factor | 0.8 * | |
Nominal output voltage | 230Vac | |
Voltage variation | Max ± 2% | |
Output frequency | 50/60Hz ± 0.1Hz | |
Efficiency | Max 88% | |
THD | <3% liner load | |
<5% non-liner load | ||
Crest factor | .3:1 | |
Overload | 125% 10secs | |
110% 10mins | ||
Transfer time | 5-8ms | |
Dynamic response time | < 30ms | |
LVD | 20Vdc | |
Display & Communication | ||
Communication Interface | RS232 and RS485 | |
4xDry contact | ||
Safety & Environment | ||
Operating Temp. | Full load, <-20℃> - 40℃ | |
Derating using, 40℃ - 60℃ | ||
Isolation | 1500Vrms | |
Mechanical | ||
Dimension (WxH) | 19"2U | |
Depth | 256mm | |
Weight | 6kgs | |
Cooling | forced fan with thermal control | |
Enclosure | IP20 | |
Standard | ||
LVD | EN60950-1 | |
EMC | EN55022 |