HSJ-120 EPS/PS Charcoal Wall Panel Making Machine

The EPS/PS Charcoal Panel Making Machine is composed of two sets Single Screw Extruder(HSJ-120mm+ HSJ-55mm), followed with co-extrusion mould, cooling water tank, traction and cutting machine, panel stacker. It's a higher-automatic designed machine, which is reliable and easy to operate.

MOLD Design: Width:120~250mm, Customized according to the Sample

HSJ-120 EPS/PS Charcoal Wall Panel Making Machine

The EPS/PS Charcoal Panel Making Machine is composed of two sets Single Screw Extruder(HSJ-120mm+ HSJ-55mm), followed with co-extrusion mould, cooling water tank, traction and cutting machine, panel stacker. It's a higher-automatic designed machine, which is reliable and easy to operate.

*** MOULD Design: Width:120~250mm, Customized according to the Sample

HSJ-120mm Single Twin Screw Extruder

The Main Extruder is designed specially for processing FOAMED EPS(PS) Material to make the basic panel board from recycled material, This will greatly reduced the manufacture cost; the assist extruder is specially for coating the virgin material on the top for a glossy surface. The two extruder will share one electric control cabinet.

Different design for choice

specially customized service for mould as per customer require.

We can make all kinds of molds according to customer requirement. Die design is based on flow simulations on our computer, flow analysis and experience, that leads to excellent flow characteristics.

Cooling and Calibration water tank(Length 12m)

This unit is mainly used for cooling and shaping the panels after the extrusion mold to help the PVC products fast finalization and guarantee it not out of shape. It is installed with 4 kw vacuum pump and 3 kw water pump, for reliable production.

Traction/Haul off Machine

With each crawler driven by frequency motor, this machine can automatically change its working speed synchronous with the whole production line speed.The caterpillar is soft and it can protect panels well while it works.

For this Charcoal Panel film work is specially done by a groups of hot-stamping and embossing machines, from 10-20 sets different based as per panel design. In these hot-stamping machine, some would be pneumatic, some would be manual. The Embossing machine is installed with steel-wheels for pressing patterns on the panels; while hot-stamping machine is installed with rubber-wheels for printing the film patterns on the panels.

Under cooperation of hot-stamping and embossing, you will different designs of panels.

This unit is mainly for collecting the panels after proudction. It will discharge the panels automatically and piles the panels into bundle. It can automatically cut with set length, auto counting function.

* Inquiry and consulting support.

* Sample testing support.

* View our Factory.

* Training how to instal the machine, training how to use the machine.

* Engineers available to service machinery overseas.