Photovoltaic module on grid off- grid used half cell 410W MONO silicon Grade A solar panels
Monocrystalline Solar Panel
Features:
Due to the reduction of internal circuits and internal consumption, the packaging efficiency is improved; in addition, the operating temperature of the components is reduced, the probability of hot spots is reduced, and the reliability and safety of the components are improved. In terms of shadow occlusion, due to the unique design, it has better anti-occlusion performance than conventional components.
Maximum Power at STC [Pmax] | 410W |
Open Circuit Voltage [Voc] | 50.4V |
Short Circuit Current [Isc] | 10.6A |
Voltage at Maximum Power Point [Vm] | 42.3V |
Current at Maximum Power Point [Im] | 9.69A |
Power Tolerance | 0~+5W |
Module Efficiency | 20.37% |
Maximum Power at NOCT [Pmax] | 310 |
Open Circuit Voltage [Voc] | 48.9 |
Short Circuit Current [Isc] | 8.26 |
Voltage at Maximum Power Point [Vm] | 40 |
Current at Maximum Power Point [Im] | 7.76 |
Values at Standard Test Conditions STC | Air Mass AM1.5,irradiance 1000W/㎡ ,Cell Temperature 25℃ |
NOCT | Irradiance at 8000W/㎡,Ambient Temperature 20℃,Wind Speed 1m/s |
Product details:
1. Reduce heat and reduce temperature loss
As the internal current and internal loss are reduced, the operating temperature of the components and the junction box is reduced, and the probability of hot spots and the risk of damage to the entire component are also greatly reduced. When the module is working outdoors, the temperature of the half-cell module is about 1.6°C lower than that of the conventional whole-cell module.
2. Reduce occlusion loss
With its special parallel-series structure, half-cell modules can be arranged longitudinally to increase the utilization rate of the support and land while reducing the loss of power generation caused by shadows.
3. Improve packaging efficiency
The packaging loss of conventional components is generally greater than 1%, while the half-chip components are generally around 0.2%. Therefore, the half-chip module takes advantage of the low current characteristics, which effectively improves the packaging efficiency of the module.
FAQ
1.Q:Do you have your own factory?
A:Yes, we are professional manufacturer mainly in solar panel for many years. Our factory is located in Hefei, Anhui, China.
2.Q:What kind of certification you have?
A:ISO9001,ISO14001,ISO18001, TUV,CQC,CE,CEC,UL and so on.
Our products could pass different labor testing according to different countries' requirements.
3.Q:Where we can use the system?
A:You can use the system for home, for power station, for lighting system and so on, wnere the grid power is expensive.
4.Q:How about your warranty?
A: We provide 1.5 and 3 years warranty for different products and whole life technical support.
5.Q:Competitive Price
A:All of our products are produced by our own factory. So the price is very copetitive.
6.Q:How to do the installation?
A: This portable solar system installation is very simple, only need to connect solar panel with controller, and push ON/OFF button, then it will start to work.
7.Q:24-hours online service
A: Please feel free to contact us. Our sales team will provide you with 24 hours better pre-sale.