Monocrystalline module Class A brands MONO half cell 450W 144cells 9BB solar panel efficiency
Monocrystalline Solar Panel
Features:
Newly designed 9 grid lines. The main function of the grid lines is to collect current. The more grid lines, the better the current collection and the stronger the stability! The conversion rate is as high as 20.7%, and the low light conditions generate more power, the collected current is large, and the power generation rate is higher , Strong stability
Maximum Power at STC [Pmax] | 450W |
Open Circuit Voltage [Voc] | 50V |
Short Circuit Current [Isc] | 11.47A |
Voltage at Maximum Power Point [Vm] | 41.4V |
Current at Maximum Power Point [Im] | 10.97A |
Power Tolerance | 0~+5W |
Module Efficiency | 20.7% |
Maximum Power at NOCT [Pmax] | 333.6 |
Open Circuit Voltage [Voc] | 42.7 |
Short Circuit Current [Isc] | 8.73 |
Voltage at Maximum Power Point [Vm] | 38.3 |
Current at Maximum Power Point [Im] | 8.73 |
Values at Standard Test Conditions STC | Air Mass AM1.5,irradiance 1000W/㎡ ,Cell Temperature 25℃ |
NOCT | Irradiance at 8000W/㎡,Ambient Temperature 20℃,Wind Speed 1m/s |
Product details:
The area of a 450mm diameter silicon wafer is 2.25 times larger than that of the current mainstream 300mm silicon wafer, and it is the substrate for the next generation of semiconductor chips. Many foreign semiconductor equipment and material companies have jointly carried out research in this area. Discussion and analysis from the perspective of technology and market The following questions: ①The relationship between the amount of feed and the yield of single crystals; ②The load-bearing capacity of the seed crystal; ③The safety of the equipment, to prevent the deflagration of silicon monochloride dust; ④The control of the crystal quality, from the selection and design of the thermal field, and the defect control , Single crystal metal control and other aspects have been analyzed; ⑤The current market situation of relevant raw materials at home and abroad was discussed. The article pointed out that the research and development conditions for the growth of silicon crystals with a diameter of 450mm in China are now mature.
FAQ
1.Q:Do you have your own factory?
A:Yes, we are professional manufacturer mainly in solar panel for many years. Our factory is located in Hefei, Anhui, China.
2.Q:What kind of certification you have?
A:ISO9001,ISO14001,ISO18001, TUV,CQC,CE,CEC,UL and so on.
Our products could pass different labor testing according to different countries' requirements.
3.Q:Where we can use the system?
A:You can use the system for home, for power station, for lighting system and so on, wnere the grid power is expensive.
4.Q:How about your warranty?
A: We provide 1.5 and 3 years warranty for different products and whole life technical support.
5.Q:Competitive Price
A:All of our products are produced by our own factory. So the price is very copetitive.
6.Q:How to do the installation?
A: This portable solar system installation is very simple, only need to connect solar panel with controller, and push ON/OFF button, then it will start to work.
7.Q:24-hours online service
A: Please feel free to contact us. Our sales team will provide you with 24 hours better pre-sale.