Adopting a nuclear power-grade high-power power module platform, the safety and reliability are higher;
The new high-efficiency three-phase PFC circuit topology is adopted, the power factor is greater than 0.99, and the harmonic distortion rate is ≤5%.
The high-frequency switching power supply module adopts full-bridge phase-shift soft-switching technology, and the execution efficiency is high.
The advanced digital current sharing technology effectively improves the current sharing accuracy and anti-interference; the first module sleep technology and the wheeling technology ensure the high-efficiency operation of the system;
Intelligent charging process control and perfect charging process monitoring and protection, fool-like operation;
A variety of charging methods such as timed charging, quantitative charging, fixed amount charging and automatic charging are available;
Real-time display of information such as the amount of charge, charging time, current electricity price, charging price, and
operating status;
The RS-485 networking communication interface can be reserved, and the optional GPRS networking mode can be provided;
Module hot swap technology makes maintenance more convenient;
Working environment temperature -20+50 °C
Scope of application
Integrated DC charging pile is suitable for urban public charging stations (bus, taxi, official car, sanitation car, logistics
car, etc.) city public charging station (private car, commuter car, bus) cityVarious parking lots in residential areas, shopping plazas, power business places,etc.; intercity highway charging stations, etc.
90KW+90KW-DC1000V Simultaneous charging Double connectors(CCS+Type 2)specifications | ||
Outlet specifications | (option) | (option) |
Connection standard | CCS Combo2 (IEC 61851-23) | CCS Combo2 (IEC 61851-23) |
Connector/socket type | IEC62196-3 CCS Combo2 Mode 4 | IEC62196-3 CCS Combo2 Mode 4 |
Vehicle Safety Communication | CCS Combo2 – IEC 61851-23 over PLC | CCS Combo2 – IEC 61851-23 over PLC |
System output voltage range | 200-1000VDC | |
Number of output interface configuration modules | 30kW×3 | 30kW×3 |
Connector maximum output current | 120A | 120A |
Compliance and safety | CE | CE |
Cable length | 4m | 4m |
General specifications | ||
Environment | Indoor / outdoor | |
Operating temperature | ,-20 ºC to +50 ºC(de-rating characteristic applies) Option: -35 ºC to +50 ºc | |
Storage temperature | ,-40 ºC to +70 ºC | |
RFID system | ISO/IEC14443A/B, ISO/IEC15693, FeliCa™ 1, NFC reader mode, LEGIC Prime & Advant | |
Payments | Smart Card, Server based Online Payments or equivalent | |
Network connection | GSM / CDMA / 3G modem, 10/100 Base-T Ethernet | |
Interaction Display | Full-color (7 in 800x480 TFT ) LCD display for driver interaction | |
Visual Indicators | Error indication, Presence of input supply indication, Charge process indication and other relevant information | |
safety protection | Over current, under voltage, over voltage, Residual current, Surge protection, Short circuit, Earth fault at input and output, Input phase reversal, Emergency shut-down with alarm, Over temperature, Protection against electric shock | |
Push Button | Mushroom type emergency stop switch (Red) | |
Supported Communication Protocols | OCPP1.6 | |
Protection | IP54 | |
Dimensions (D x W x H) | 750×1860×690 mm | |
Input Chracteristics | ||
AC Supply System | Three-Phase, 5 Wire AC system (3Ph.+N+PE) | |
Nominal Input voltage | 3Ø, 304-485VAC | |
Input Frequency | 50Hz, ±10Hz | |
Input Supply Failure backup | Battery backup for minimum 1 hour for the control system and billing unit. Data logs should be synchronized with CMS | |
during back up time, in case battery drains out | ||
Power Module | ||
Max Output Power per Module | 30kW | |
Max Output Current per Module | 40A | |
Output voltage range for each module | 200-1000VDC | |
Converter Efficiency | Maximum efficiency >95% | |
Power facto | Rated output load PF ≥ 0.99 | |
Voltage regulation accuracy | ≤±0.5% | |
Current sharing accuracy | ≤±0.5% | |
Steady flow accuracy | ≤±1% | |
Connector parameters 1# | ||
Rated voltage | DC1000V | |
Rated current | 150A | |
standard | IEC62196-3 CCS2 | |
Electromagnetic lock | NO | |
Temperature Sensor | no | |
communication interface | PLC | |
Connector parameters 2# | ||
Rated voltage | DC1000V | |
Rated current | 150A | |
standard | IEC62196-3 CCS2 | |
Electromagnetic lock | NO | |
Temperature Sensor | no | |
communication interface | PLC |