Waste Plastic Pyrolysis Fuel Oil Diesel Plant Waster Plastic Recycle To Fuel And Gas

Product description

With the rapid development of the plastics industry, the application of plastic products is becoming more and more extensive, but because plastics are not easy to rot and degrade, this seriously affects the ecological environment of the earth. The waste plastic pyrolysis refining equipment is not only pollution-free to the environment but also can recover energy effectively.

The oil yield of different raw materials

Output product application

---Fuel oil

1. The main product - fuel oil produced by waste pyrolysis machine is widely used for industrial and commercial purposes. This fuel oil is a kind of good heating fuel that can be applied for boiler factories, cement factories, glass factories, steel mills, etc.

2. It also can be refined to diesel by the distillation machine. The distillation diesel can be used for diesel engines.

---Carbon black

1. It can be pressed into pellets for use in industrial heating. Pellets are a good alternative to coal as their calorific value is equivalent to that of coal.

2. It can be ground and refined into different standards.

HUAYIN pyrolysis technology

1) Industrial batch type, different capacity from 1ton to 15ton per batch.

2) low consumption, high oil yield, and quality, continuous and steady operation of production.

3) Horizontal rotating reactor enables the waste material equally heated and completely pyrolyzed to achieve high production efficiency.

4) Anti-coking device, alarm, auto pressure releasing device, anti backfire device, vacuum pump to ensure operation safe and reliable.

5) Combustible Gas recycling utilization technology, the combustible gas can be used for heating, remaining heat can be fully utilized, realized self-supply for pyrolysis process, dramatically minimizing running cost.

6) Adopt 3 layers of ceramic packing dedusting device and water spray, finally, no black smoke discharged out. SGS emission report provided.

7) Support PLC system to achieve high automation production and ensure operation under safety conditions.

8) Low requirement for manpower and clean production.

Operation Process

1: Feeding. Feed tires into reactor manually or with auto feeder;

2: Preheating. Waste tyres will be melted under high temperatures and oil gas comes out.

3: Oil-producing. Oil gas goes through the cooling system and is cooled down into liquid fuel oil; Some oil gas that can not be turned into liquid oil will go back to the heating furnace for second burning.　

4: Cooling. After the oil processing is finished, leave the plant for cooling.

5: Carbon black discharging.

Our company

1. Help the client do the Feasibility Analysis Report according to the customer’s local market.

2. Design the layout drawings according to the site of customers.

3. For each set of pyrolysis plants, one engineer will be sent to guide the installation, test the machine and train the workers.

4. One-year warranty for the complete plant.

For more details, welcome contact us!