High Accuracy Ultrasonic Level Sensor Measurement Range 100…2000mm With PBT OR FRP Housing
Highlights
TECH-IN
Temperature compensate
LED for status indication
Battery powered
Minmal dead bands
Applications
Liquid and Solid Level Measurement
Tanks,Totes,Processing
Bulk Material Management
Factory automation
Position Detection
Avoid collision
Ultrasonic sensor | | UM2000-UN2-TTL | Technical data | | | General Specifications | | Sensing distance | 100…2000mm | Adjustment range | 100…2000mm | Unusable area | 0…100mm | Standard target plate | 100mm×100mm | Transducer frequency About | 180 kHz | Response delay About | 125ms | Indicators/Operating means | | LED yellow | solid: NO LED flash: | LED red | flashing: | Electrical specifications | | | Operating voltage UB | 10…30VDC ripple10%ss | No-load supply current | ≤20mA | Output | | Output type | 1 digital output UART TTL | Resolution | | Deviation of the characteristic curve | ±1% of full-scale value | Repeat accuracy | ±0.1% of full-scale value | Load impedance | >1k Ohm | Maximum switching current | mA | Temperature influence | ±1.5% of full-scale value | Ambient conditions | | Ambient temperature | -25…70℃ | Storage temperature | -40…85℃ | Mechanical specifications | | | Protection grade | IP68 | Connection | PVC cable,4-CABLE | Material | | Housing | PBT OR FRP | Transducer | Epoxy resin/hollow; Polyurethane foam | 1 BN=BROWN 2 GN=GREEN 3 BU=BLUE 4 BK=BLACK | Weight | 70g | Compliance with standards and Directives | Standard conformity | EN 60947-5-2:2007 | | | |