High Accuracy Ultrasonic Distance Sensor Measurement Range 100…2000mm With PBT OR FRP Housing
Highlights
TECH-IN
Temperature compensate
LED for status indication
Battery powered
Minmal dead bands
Applications
Liquid and Solid Level Measurement
Tanks,Totes,Processing
Bulk Material Management
Factory automation
Position Detection
Avoid collision
Ultrasonic sensor |
|
UM2000-UN2-TTL |
Technical data |
|
|
General Specifications |
|
Sensing distance |
100…2000mm |
Adjustment range |
100…2000mm |
Unusable area |
0…100mm |
Standard target plate |
100mm×100mm |
Transducer frequency About |
180 kHz |
Response delay About |
125ms |
Indicators/Operating means |
|
LED yellow |
solid: NO LED
flash: |
LED red |
flashing: |
Electrical specifications |
|
|
Operating voltage UB |
10…30VDC ripple10%ss |
No-load supply current |
≤20mA |
Output |
|
Output type |
1 digital output UART TTL |
Resolution |
|
Deviation of the characteristic
curve |
±1% of full-scale value |
Repeat accuracy |
±0.1% of full-scale value |
Load impedance |
>1k Ohm |
Maximum switching current |
mA |
Temperature influence |
±1.5% of full-scale value |
Ambient conditions |
|
Ambient temperature |
-25…70℃ |
Storage temperature |
-40…85℃ |
Mechanical specifications |
|
|
Protection grade |
IP68 |
Connection |
PVC cable,4-CABLE |
Material |
|
Housing |
PBT OR FRP |
Transducer |
Epoxy resin/hollow; Polyurethane foam |
1 BN=BROWN
2 GN=GREEN
3 BU=BLUE
4 BK=BLACK |
Weight |
70g |
Compliance with standards and Directives |
Standard conformity |
EN 60947-5-2:2007 |
|
|
|