Electronic Desktop 50kg 500N Tensile Testing Machines

Product Description

This machine adopt high precision ball screw which have the advantage of small mechanical inertia, wide adjustment range, compact structure, convenient operation and stable performance. It meet the requirements of GB/T 16491 and GB/T 2611. It's especially used for button for clothing, toys or other products pull test with specified grip and also can be used for tape, paper, film tensile test with related tensile clamp.

General Specification

Estimated Packaging Dimensions: (W*D*H) 500*450*1150mm

Power supply source: single-phase, 220V, 50/60Hz (can be appointed)

Estimated Gross Weight: 55kg

HS Code: 9024800000

Standard Features

Applications

This machine is especially used for button for clothing, toys or other products pull test with specified grip and also can be used for tape, paper, film tensile test with related tensile clamp.

Quality Assurance

1. The guarantee period with FOC within 1 year (not including expendable parts cost and transport & travel fees)

1.1 During the guarantee period, Haida shall supply free maintenance or replacement for the damaged part (just for non-expendable part) caused by non-human reasons;

1.2 If any quality problems occur within the guarantee period, and Haida must provide on-site service, the transport and travel expense shall be borne by buyer;

1.3 If any big quality problems occurs out of the guarantee period, Haida will provide a maintain service, the transport and travel expense shall be borne by buyer, also charge for a favorable price for new parts;

1.4 Haida will provide a lifetime favorable price to the buyer for expendable & non-expendable parts used in system operation, equipment maintenance;

2. The following conditions need to be paid reasonably even in the guarantee period:

2.1 Natural disaster

2.2 Operating mistakes

2.3 Voltage is not fit for our manual

2.4 Uninstall without our guides

2.5 Damaged for borrowing to others

2.6 Damaged for without authorized machine modification

2.7 Damaged for without authorized calibration

2.8 Without authorized transshipment mistake

3. Attentions: the machine cannot be used following situations:

3.1 Vibration, rocking place.

3.2 Direct sunlight.

3.3 Hot, dusty, damp places.

3.4 To ensure safe, AC supply of the machine should be well grounded.

3.5 Do not use strong solvents (such as: benzene, nitro oil) washing machine.

3.6 Do not inject water and debris into the machine to prevent damage to electrical components and electrical shock.

3.7 Machine’s disassembly and debugging can only be measured by the State Department approved the units and the company, other people not allowed to overhaul.