GUIHE factory underground tank oil leak detector
1.GUIHE factory underground tank oil leak detector
2. underground tank oil leak detector with leak sensor and leak control console two part !
3. underground tank oil leak detector the detail as follow:
A : picture
B : detail
Product introduction
Double-deck Tank Leakage Detecting Instrument consist of GH-SLI Console and SYW-E Sensor. It can make a distinction between water and oil, enjoys real - time monitoring function.
This instrument designed for detecting water and oil between the two layers of double-deck tank. When there are lakegae between the two layer of tank, the SYW-E Sensor will detetect it and give singal to GH-SLI Console, the console will giving an audible and visual alarm through software calculation.Users can take measures to deal with the leakage according the alarm, to avoid the safety hidden trouble and environmental pollution.The leakage detecting instrument complete with switch output signal, can realize interlocking control after connect with other equipments
●Product features
1,Safety: Explosion-proof grade ExiaIIBT4 issued by PCEC. The sensor structure is 304 stainless.
2,Sensitive: the instrument detect accuracy <3mm, response time <2s
3,Stability: frequency variation of piezoelectric transducer belong to physical attribute, without structure, light and other factors interference. It can adapt to the complex environment, and with great anti - interference performance.
Intelligent trouble diagnosis: alarm lamp will flash when anything goes wrong with sensor. Users can inform factory alarm lamp status so that technicians judge the faults and repair it.
4,Intelligent oil/water diagnosis: detecting water and oil between the two layers of double-deck tank,when there are leakage between the two layer of tank, the SYW-E Sensor will detect it.
5,Simple Installation:485 protocol bus standard, easy for installation. Can share the same wire with level meter.
6,Reserve switch output port, can realize interlocking control after connect with other equipments.
Type | Technical Parameters |
Detector voltage | 220VAC |
Sensor voltage | 12VDC |
Alarming mode | audible and visual alarm |
Sensor length | Personally made |
Range of temperature | -40℃~ +70℃ |
Environment humidity | <85% |
Output mode | switch value |
Inspection time | ≤ 1s |
Range of pressure | 80Kpa~ 110Kpa |
Measurement accuracy | <3mm |
Dimension of detector | 300* 180* 113 |
Connection mode | 485 series/ parallel |
Contact