Brief Introduction:
Solar road stud adopt high brightness LED as light source, according with safety standards, energy saving, high visibility, installation easily, long life, stable and reliable, non-corrosive cables, no conventional energy consume, widely used in highway traffic safety alerts. It can effectively prevent traffic accidents.

Specification:

Advantages:
1: Aluminium Outer Casing With Anodized Coating
The Anodized Coating of outer casing protect it from being Oxidized, and it look smooth and nice.
2: Reflectors Embeded from the Inner Side
The reflectors are embeded from the inner side, which is lower than surrounding alumnium and not easily be damaged, Reflective sheet inside coated with layer of film avoid eroding reflectors. The life span of reflectors is extend effectively.
3: High Quality Adhesive.
We filled up the solar road stud with AB epoxy glue, it is solid inside, it had high performance on waterproof, it can get protect level IP68, and can anti 30 tons pressure, it is widely used in the pool.
4: Super Bright LED With Epistar Chip
The LED is with Epistar Chip, the light is very bright, it is visible from 1000 meters and the lifespan is as long as 100000 hours, it won't get fade and die out during usage.
5: Reduce the Impact
The aluminium fram with smooth adges is sand-blasted, the solar road stud is no harm for the tires, and could extend the wheels life span.

Installation Notes:

• Before installing the solar road studs, please put barriers around the construction, especially on the traffic roads.
• Before installing the solar road studs, please clean road with a brush, to make the surface of road smooth, clean and dry.
• If the solar road stud has the anchor, please drill a hole which is 1cm deeper and 2mm wider than its anchor.
• When you install the solar road stud, please put glue on the bottom evenly. Keep it in the right direction and press it into the road tightly.
• On the highway, please install the solar road studs every 5 to 8 meters. On the ordinary roads, please install it every 3 to 5 meters.
• After 2 hours of installation, you can check and fix solar road studs. After 4 hours of installation, the glue will dry completely.

Tips:

• If you do not install the solar series product on time after you received the products, please charge them under the sun outdoor once per month to ensure the effectiveness of battery;
• OEM&ODM available;
• Lifespan 5~15 years, 14 moths warranty.

Solar Stud Packing:

Solar Stud Factory Showing:

FAQ:
F: Are you factory?
A: Yes, we are factory , and custom-made meets your requirments.

F: Can we take the sample for testing?
A: YES, We can send free sample, but you must pay the freight fee.

F: Is it only work in the daytime?
A: Light operated, Auto charging in the sun, Automatically start to work at night, It can flash 180 hours or light 40 hours after fully charged.

F: If in a rainy day,could it work normally?

A: Import single crystal silicon solar panel, it also can be charge under rainy day, snow and other bad weather condition.Super waterproof, IP68,through special technology to seal the solar cell panel, electronic components and led in the shell, can be used in the watersurface longterm.

F: How long is the warranty period?
A: 14 months

F: Why the customer trust and choose us?
A: 25 years professional experience in export, Excellent product quality, by CE, ROHS certification of product quality,provide ODM/OEM service.