Cone crusher will need to have abag dust collector,when working. When the material,passes through the cone,it will produce alarge amount of dust. This dust,will pass through the pipe into the bag,dust collector. Inside the dust collector,there are multiple filter bags,and the dust will be filtered on the filter bag.Clean air is discharged from the top of the dust collector. This dust removal method can effectively reduce dust pollution and improve the working environment of the factory!
Parameter/Model | PPC32-3 | PPC32-4 | PPC32-5 | PPC32-6 | PPC64-4 | PPC64-5 | PPC64-6 | PPC64-7 | PPC64-8 | |
Treated air volume(m2/h) | 6900 | 8030 | 11150 | 13390 | 17800 | 22300 | 26700 | 31200 | 35700 | |
Filtration velocity(m/min) | 1.2-2.0(Select different net filtration wind speed according to different dust points) | |||||||||
Total filtration area(m2) | 93 | 124 | 155 | 186 | 248 | 310 | 372 | 434 | 496 | |
Net filtration area(m2) | 62 | 93 | 124 | 155 | 186 | 248 | 310 | 372 | 434 | |
Number of dust collector chambers (PC) | 2 | 4 | 5 | 6 | 4 | 5 | 6 | 7 | 8 | |
Total filter bags (PCS) | 96 | 128 | 160 | 192 | 256 | 320 | 384 | 448 | 512 | |
Dust collector resistance(Pa) | 1470-1770 | |||||||||
Dust concentration of imported gas(g/m3) | < 200 | < 1000 | <1000 | |||||||
Outlet gas dust concentration(mg/m3) | <30 | <30 | ||||||||
Dust collector gas under negative pressure(Pa) | 5000 | 5000 | ||||||||
Soot cleaning Compressed air | stress(Pa) | (5-7)X1000 | ||||||||
Air consumption (m3/min) | 0.27 | 0.37 | 0.46 | 0.55 | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 | |
Impulse valve | Quantity (PCS) | 3 | 4 | 5 | 6 | 4 | 5 | 6 | 7 | 8 |
Size (inches) | 1.5 | 2.5 | ||||||||
Lift valve | Quantity (PCS) | 3 | 4 | 5 | 6 | 4 | 5 | 6 | 7 | 8 |
specification(mm) | Lift valve diameter Ø460 cylinder diameter Ø63 | Lift valve diameter Ø595 Cylinder diameter Ø100 | ||||||||
Rigid impeller feeder | Feed hole300X300mm high400m Speed 30.31r/min deceleration motor Power 1.1KW output 24m3/h | |||||||||
Screw conveyor | specification | Diameter Ø300 Output 30m3/h (filling rate Ø=0.7) | ||||||||
Gear motor | Model XWD2.2--5--1/43. Power 2.2KW | |||||||||
Air transfer chute | ||||||||||
Ash cleaning program controller | The input and output voltage are 220V, the controller is supplied by the manufacturer, see the controller manual for details | |||||||||
Filter bag specifications and materials | Diameter X length Ø130X2450mm, polyester needle felt weight 500g/m3, operating temperature 120 degrees (suitable filtration materials can be selected according to the actual mining temperature and flue gas properties) | |||||||||
Area of insulation layer(m2) | 26.5 | 34 | 41 | 48.5 | 70 | 94 | 118 | 142 | 166 | |
Total equipment (Approximate value, excluding insulation) | 2400 | 3400 | 4400 | 5400 | 6900 | 8300 | 9700 | 11100 | 1250 |