INNOLIGHT TR-FC13T-NAM 100Gb QSFP28 Module CWDM4 IR4 1310m 2km Optical Transceiver

Innolight's TR-FC13T-NAM QSFP28 100G Optical Transceiver's Overview

This 100G QSFP28 transceiver with central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G.694.2. It contains a duplex LC connector for the optical interface and a 38-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. Host FEC is required to support up to 2km fiber transmission.

This product converts the 4-channel 100Gb/s electrical input data into CWDM optical signals (light), by a driven 4-wavelength Distributed Feedback Laser (DFB) array. The light is combined by the MUX parts as a 100Gb/s data, propagating out of the transmitter module from the SMF. The receiver module accepts the 100Gb/s CWDM optical signals input, and de-multiplexes it into 4 individual 25Gb/s channels with different wavelength. Each wavelength light is collected by a discrete photo diode, and then outputted as electric data after amplified by a TIA and a post amplifier. Figure 1 shows the functional block diagram of this product.

Features

• QSFP28 MSA compliant
• 4 CWDM lanes MUX/DEMUX design
• Supports 103.1Gb/s aggregate bit rate
• 100G CWDM4 MSA Technical Spec Rev1.1
• Up to 2km transmission on single mode fiber (SMF) with FEC
• Operating case temperature: 0 to 70oC
• 4x25G electrical interface (OIF CEI-28G-VSR)
• Maximum power consumption 3.5W
• LC duplex connector
• RoHS compliant

Applications

• Data Center Interconnect

• 100G Ethernet

• Infiniband QDR and DDR interconnects

• Enterprise networking

Parameters for the Intel QSFP28 100G Optical Transceiver:

Photo for Innolight's QSFP28 100G TR-FC13T-NAM Transceiver

FAQ

A1:Yes, All the brand Topstar's SFP compatible as the following:Nortel,Juniper,Alcatel-lucent,FOUNDRY,

EXTREME, Ruijie, NETGEAR, ZTE, Enterasys, ZyXEL, Linksys, Ericsson, DCN, Allied, SMC, Brocade, Force10, Hirschmann, Planet, Adtran, ASNTE, Trendnet, BDCOM, BLADE, BITWAY, Telco, D-Link, Feixun...etc

Q2. How does your company do regarding quality control?

A2: Every single optic individually tested in our test center , and also tested for compatibility on a variety of different brands of network equipment

Q3. What are the trade terms?

A3: Lead Time: most popular optics in stock ,ready to ship. some of higher-value and specialize optics have a short lead time.

Payment term: Western union, T/T, Aliexpress escow, money gram ,cash payment

Warranty: 3 years

Q4. What is operating temperature range of optical modules?

A4: Commercial temperature range(COM) : 0 to 70°C(32 to 158°F)

Extended temperature range(EXT):-5 to 85°C(23 to 185°F)

Industrial temperature range(IND)::-40 to 85°C(-40 to 185°F)

Storage temperature range:-40 to +85°C(-40 to 185°F)

We can supply according to your request.