Miray’s QSFP28-100G-AOC1m series are active optical cables (AOC) that allows bi-directional 100Gbps transmission suitable for high performance computing (HPC) clustering and other high-throughput data network, with advantages such as high speed, high density, low latency, low power consumption and light weight.
Miray supply two kinds of 100G QSFP28 active optical cable: QSFP28 to QSFP28 AOC, QSFP28 to 4*SFP28 AOC. Both of them conform to MSA QSFP28, IEEE802.3, SFF-8431 and other standard protocols. The optical treansceiver mainly used in Ethernet, data center internal network, data center interconnection and other environments
Quad Small Form-factor Pluggable (QSFP)
Maximum Aggregate Data Rate 100Gbps
QSFP28 high density form factor
EDR, FDR, QDR, DDR, SDR (Infiniband)
10/25/40/100G Ethernet
Bi-directional parallel link
BER<1e-12 From 0 to 50 degree case temp
CDR no/off automatically
10/14/25/28Gb/s per lane, x4 channels
Up to 70m (OM3)
Up to 100m (OM4)
Low power consumption
Reliable VCSEL array technology using mulmode fiber
PIN diode four array
I2C management interface
3.3V power supply voltage
Maximum 2W power consumption
Operang case temperature: 0°C to 70°C
RoHS compliant
Parameter | Conditions | Min | Typ. | Max | Units |
Data rate per lane | 8B/10BCoding, 64B/66B Coding | 1 |
| 26 | Gbps |
3.3V Supply Voltage |
| 3.13 | 3.3 | 3.47 | V |
Power supply noise including ripples | 1kHz to frequency of operation mersured at VCC_HOST |
|
| 50 | mVpp |
Case temperature |
| 0 | 35 | 70 | ℃ |
Parameter | Symbol | Min. | Typ. | Max. | Units | Notes | |
ModSelL | Module Select | VOL | 0 | - | 0.8 | V |
|
Module Unselect | VOH | 2.5 | - | VCC | V |
| |
LPMode | Low Power Mode | VIL | 0 | - | 0.8 | V |
|
Normal Operation | VIH | 2.5 | - | VCC+0.3 | V |
| |
ResetL | Reset | VIL | 0 | - | 0.8 | V |
|
Normal Operation | VIH | 2.5 | - | VCC+0.3 | V |
| |
ModPrsL | Normal Operation | VOL | 0 | - | 0.4 | V |
|
IntL | Interrupt | VOL | 0 | - | 0.4 | V |
|
Normal Operation | VoH | 2.4 | - | VCC | V |
| |
Electrical transmitter Characteristics | |||||||
Differential Date Input Swing | Vin,p-p | 200 | - | 1600 | mV |
| |
Output Differential Impedance | Zin | 90 | 100 | 110 | Ω |
| |
Electrical Receiver Characteristics | |||||||
Differential Data Output Swing | Vout | 200 | - | 800 | mV |
| |
Bit Error Rate | BER | - | - | E-12 | - | 1 | |
Input Differential Impedance | ZD | 90 | 100 | 110 | Ω |
Part No. | Product Type | Rate | Media Type | Wavelength | Reach | Commercial Temp. | Industrial Temp. |
QSFP28-100G-AOC1M | QSFP28 AOC | 40G | MM | 850nm | 1m | 0~70℃ | -40~85℃ |
QSFP28-100G-AOC2M | QSFP28 AOC | 40G | MM | 850nm | 2m | 0~70℃ | -40~85℃ |
QSFP28-100G-AOC3M | QSFP28 AOC | 40G | MM | 850nm | 3m | 0~70℃ | -40~85℃ |
QSFP28-100G-AOC5M | QSFP28 AOC | 40G | MM | 850nm | 5m | 0~70℃ | -40~85℃ |
QSFP28-100G-AOC7M | QSFP28 AOC | 40G | MM | 850nm | 7m | 0~70℃ | -40~85℃ |
QSFP28-100G-AOC10M | QSFP28 AOC | 40G | MM | 850nm | 10m | 0~70℃ | -40~85℃ |
QSFP28-100G-AOC20M | QSFP28 AOC | 40G | MM | 850nm | 20m | 0~70℃ | -40~85℃ |
QSFP28-100G-AOC30M | QSFP28 AOC | 40G | MM | 850nm | 30m | 0~70℃ | -40~85℃ |