Unmanaged 10G Ethernet to Copper SFP+ Fiber Optic Media Converter

Description

Miray 10Gigabit Ethernet Media Converter is high-performance 10G optical media converter, Using Optical – Electrical – Electrical wavelength conversion, realize the optical signal equilibrium amplification, clock extraction and optical regeneration, and with WDM (DWDM / CWDM) technology, can achieve optical signals transmit in a single fiber by single or multiple way over a long distance. On the existing network infrastructure, 10 Gigabit Ethernet Media Converter can quickly improve the communication capacity, expand the bandwidth, while using low cost and high cost-effective solutions to manage and operate the system, easy operation and maintenance.

Features​

• 100M/1G/2.5G/5G/10GBase-T to 10GBase-X SFP+ Fiber Media Converter;
• Unit and Port LEDs allow for quick status information;
• Support Auto-negotiation, Auto MDI/MDI-X and Half/Full Duplex mode;
• Support Jumbo Frame;
• Automatic Link Restoration;
• Connect to legacy network equipment;
• Eliminate Collision Domains;
• Support 1U Rack (12 channel) and Standalone use;
• Transparent transport and very low delay;
• Support ITUT prescribed DWDM/CWDM wavelength;
• Support Loopback test function;
• Comply with IEEE 802.3/802.3u/802.3ab/802.3bz/802.3an/802.3ae Ethernet standards;
• Prevent packet loss with back pressure and IEEE 802.3x pause frame flow control;
• SC/FC/ST/LC Connectors optional;
• DIP Switch to set different configurations;
• Compact package size, easy installation;
• Support Link Fault Pass Through (LFP) and Automatic Laser Shutdown (ALS) function;

Application

• Open SFP slot lets you customize your connection mode or distance using most MSA-compliant transceivers
• Transmit full 10 Gigabit network speeds to remote areas over longer distances than copper (RJ45) cabling
• Use fiber-optic cable to extend or bridge your network to a separate building

Technical Specification

Ordering Information

Application