Miray’s MR-I1F1T-SC20 Industrial Media Converters are hardened devices designed to reliably operate in harsh environments such as those found on factory floors, outdoor enclosures or other hazardous environments.
Eliminate EMI and RFI issues or overcome distance limitations with copper based cabling by using the Industrial Media Converter to convert your copper based equipment over to fiber optics. The media converter can connect to either 10Base-T or 100Base-TX ports and provides a 100Base-FX fiber optic connection for links up to 120 km.
E-link MR-I1F1T-SC20 is a high-speed 10/100Base-TX Industrial Ethernet Media Converter, easy to connect server, repeater, switch, device to device, Can satisfy customers require for long distance, high speed, wide broadcast. MR-I1F1T-SC20 supports 1 TP ports and 1 fiber ports. TP (RJ45) support 10/100Base-T(X), Full/Half duplex mode, and auto MDI/MDI-X connection;100Base-FX supports single-/multi-mode, SC/ST connector, SFP Slot optional. MR-I1F1T-SC20 adopts industry standard design, IP40 protection, power supply input 24VDC (12~48VDC), -40 to 80°C working temperature.
Ethernet | |
Standards: | IEEE802.1 10Base-T, IEEE802.3u 100Base-TX |
IEEE802.3 100Base-FX | |
IEEE802.3X Flow Control | |
Processing Type: | Store-and-Forward |
Half-duplex, Full-duplex | |
Forward Filter Rate:: | 148,800pps (100Mbps) |
Cabling: | 100Base-TX: Cat5 or above |
Maximum Distance: | Cat5 UTP up to 100m |
Connector: | 1x RJ45 |
Optical Port: | 100Base-FX ports (SC/ST/FC/LC connector, SFP Slot, optional) |
Environmental | |
Operating Temperature: | -40°C to 80°C (-40°F to 176°F) |
Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
Relative Humidity: | 5% to 95% non-condensing |
MTBF: | > 300,000 hrs |
Electrical and Mechanical | |
Input Power: | 24VDC (12~48VDC, 4-Pin Terminal Block) |
Power Consumption: | 12W Max. 0.5A@24VDC |
LED Indicators | |
PWR: | Power Status |
RUN: | Link/Activity, Speed |
FX: | Link/Activity |
Dimensions (WxDxH): | 118 x 86 x 39mm |
Weight: | 0.45KG |
Casing: | IP40 Protection, Aluminum Case |
Mounting Options: | Din-Rail mounting, Wall mounting |
Regulatory Approvals | |
Safety: UL 60950-1 | |
EMS: • IEC(EN)61000-4-2(ESD): ±8kV Contact Discharge,±15kV Air Discharge • IEC(EN)61000-4-3(RS): 10V/m(80~1000MHz) • IEC(EN)61000-4-4(EFT): Power line: ±4kV ; Signal Cable: ±2kV • IEC(EN)61000-4-5(Surge): Power line: ±4kV CM/±2kV DM; Signal Cable: ±2kV • IEC(EN)61000-4-6: 3V(10kHz~150kHz),10V(150kHz~80MHz) • IEC(EN)61000-4-16: 30V cont. 300V,1s • IEC(EN )61000-4-8 | |
EMC: EN61000-4-8 | |
Shock: IEC 60068-2-27 | |
Free Fall: IEC 60068-2-32 | |
Vibration: IEC 60068-2-6 | |
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A | |
Industry: IEC61000-6-2 | |
Rail: EN50155, EN50121-4 | |
Traffic: NEMA TS-2 |
Application