Miray’s MR-I1GF1T-SFP Industrial Ethernet switch is 1* 1000Base-X & 1*10/100/1000Base-T Industrial Ethernet Switches, PoE is optional. Through the fanless heat dissipation circuit design, wide range of working environment temperature, high protection level and other technologies, it provides excellent industrial quality with high/low temperature resistance and lightning protection, and enhances the reliability and safety of industrial networks. It can better meet the deployment requirements of rail transit, safe city, intelligent transportation, outdoor monitoring and other harsh environments.
• 1 Port 10/100/1000Mbps RJ45 with Auto Uplink , 1 port 1000Mbps SFP Slot
• Automatic MAC address learning and aging
• Automatically support IGMP (Multicasting)
• 10/100/1000Mbps Auto-negotiation , auto-MDI-MDI-X
• LED indicators for monitoring power/link/activity
• Supports 10/100/1000Mbps-Full/Half-duplex
• Supports Wall-mount and DIN-Rail installation for lightning protection
• Supports Daisy-Chain connection
• Supports Broadcast Storm Control
• Super lightening protection, IP40 protection
• Excellent heat elimination without cooling fan
• Redundant dual DC power inputs
• Redundant Power Inputs
• Apply to Urban Intelligent Traffic Monitoring System (ITS), Safe City
• Harsh industrial environment or higher requirement
• -40℃~+85℃ operating temperature range
• 5-Year Warranty
Provider Mode Ports | |
Fixed port | 1*1000Base-FX, 1*10/100/1000Base-TX |
Power interface | Phoenix terminal, dual power supply |
LED Indicators | PWR, OPT, NMC, ALM |
Reset | DIP switch reset |
Cable Type&Transmission Distance | |
Twisted-pair | 0-100m(CAT5e,CAT6) |
Single mode optical fiber | 20/40/60/80/100km |
Multi mode (optical) fiber | 550m |
Net Topology&Networking Scale | |
Star topology | Support |
Bus topology | Support |
Tree topology | Support |
Hybrid topology | Support |
Electrical Specifications | |
Input voltage | DC12-58V |
Power consumption | Non PoE<6W, PoE<36W |
Voltage Alarm | Support |
PoE (Optional) | |
PoE port | 1 |
PoE Protocol | 802.3AF ,802.3AT |
PoE Pin Assignment | 1,2,3,6 |
PoE Mode | Standards and non-standards mode are support optional |
Remote PD Reset | Support Optional |
Layer 2 Switching | |
Switching capacity | 14G |
Packet forwarding rate | 10.416Mpps |
MAC address table | 8K |
Buffer | 1M |
Forwarding delay | <5us |
MDI/MDIX | Support |
Flow control | Support |
Jumbo Frame | 10KBytes |
WatchDog | Support |
Port Isolation | Support |
Environment | |
Operating temperature | -40℃-+85℃ |
Storage temperature | -40℃~ +85℃ |
Relative humidity | 5%~95% (non-condensing) |
Thermal methods | Fan-free,natural cooling |
MTBF | 300,000 hours |
Mechanical Dimensions | |
Product size | 118X86X39mm |
Installation method | Din-rail |
Weight | 0.45KG around |
EMC&INGRESS Protection | |
IP level | IP40 |
Surge protection of power | IEC 61000-4-5 Level X (6KV/6KV)(8/20us) |
Surge protection of ethernet port | IEC 61000-4-5 Level X (4KV/4KV)(10/700us) |
RS | IEC 61000-4-3 Level 3 (10V/m) |
EFI | IEC 61000-4-4 Level 3 (1V/2V) |
CS | IEC 61000-4-6 Level 3 (10V/m) |
PFMF | IEC 61000-4-8 Level 4 (30A/m) |
DIP | IEC 61000-4-11 Level 3 (10V) |
ESD | IEC 61000-4-2 Level 4 (8K/15K) |
Free-Fall | 0.5m |
Application