This Cisco SFP-10G-LR Compatible 10GBase-LR LC SFP Transceiver with a duplex LC female connector functions just like the Cisco® SFP-10G-LR transceiver module and is designed to operate with Cisco networking equipment. It also meets or exceeds the SFP-10G-LR's original specifications and complies with MSA standards.
This 10GBase-LR transceiver is fully hot-pluggable, so you can install it without shutting down the network or rebooting your device. It supports data transfer rates up to 10 Gbps with 1310 nm wavelength signaling. It transmits across six miles (10 kilometers) of 9/125 SMF cabling. Its metallic housing allows low EMI.
Parameter | Symbol | Unit | Min | Typ | Max |
Operating Case Temperature Range | Tc | oC | 0 |
| 70 |
Power Supply Voltage | Vcc | V | 3.14 | 3.3 | 3.46 |
Bit Rate | BR | Gb/s |
|
| 10.52 |
Bit Error Ratio | BER |
|
|
| 10-12 |
Max Supported Link Length | L | Km |
|
| 10 |
Parameter | Symbol | Min | Typ | Max | Note | Unit |
Optical Transmitter Characteristics | ||||||
Nominal Wavelength | λ |
| 1310 |
|
| nm |
Optical Output Power | Pav | -6 |
| 2 |
| dBm |
Extinction Ratio | ER | 3.5 |
|
|
| dB |
Average Launch Power of OFF Transmitter | POFF |
|
| -35 |
| dBm |
Relative Intensity Noise | RIN |
|
| -128 |
| dB/Hz |
Optical Receiver Characteristics | ||||||
Center Wavelength | λC | 1260 |
| 1620 |
| nm |
Receiver Sensitivity@10.3Gb/s | RSENSE |
|
| -14.4 | 1 | dBm |
Receiver Overload |
| 0.5 |
|
|
| dBm |
Optical Return Loss |
| 27 |
| - |
| dB |
LOS Assert | LOSA | -30 |
|
|
| dBm |
LOS De-Assert LOS | LOSD |
|
| -17 |
| dBm |
LOS Hysteresis |
| 0.5 |
|
|
| dB |