Miray SFP-GE-BX20-SM1310/1550 series SFPs are small form factor pluggable (SFP) transceivers compatible with multi-sourcing agreement (MSA). It is suitable for single-mode fiber (SMF) communications in 1.25Gbps Ethernet and 1G/2G Fiber Channel.
The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance
preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472.
Parameter | Symbol | Minimum | Maximum | Units |
Supply Voltage | Vcc | 3.15 | 3.45 | V |
Ambient operating Temperature | Top | 0 | +70 | °C |
Operating Relative Humidity | – | 5 | 95 | % |
Transmitter Specification
Parameter | Symbol | Min | Typical | Max | Unit | |
Data Input Swing Differential | VIN | 400 | 1800 | mV | ||
common mode voltage tolerance | 15 | mV | ||||
Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | |
Transmit Disable Input | High | VD | 2.0 | Vcc | V | |
Low | VEN | VEE | VEE +0.8 | V | ||
Transmit Enable Output | High | VD | 2.0 | Vcc | V | |
Low | VEN | VEE | VEE +0.8 | V |
Parameter | Symbol | Min | Typical | Max | Unit | note |
Centre Wavelength | λc | 1270 | 1580 | nm | ||
Receiver Sensitivity | Sen | -22 | dBm | 2 | ||
Receiver Overload | Psat | -3 | dBm | 2 | ||
LOS De-Assert | LOSD | -24 | dBm | |||
LOS Assert | LOSA | -35 | dBm | |||
LOS Hysteresis | 1 | 4 | dB | |||
Receiver Reflectance | Rrx | -12 | dB |