Miray's JD118A HPE H3C compatible SFP transceiver supports up to 550m link lengths over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. Each SFP transceiver module is individually tested to be used on a series of HPE switches, routers, servers, network interface card (NICs) etc. Featuring low power consumption, high speed, this easy to install, hot swappable 1G SFP transceiver is ideal for Internet Service Provider (ISP) Gigabit Ethernet communication links, Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks and other optical links.
Parameter | Symbol | Min. | Typical | Max. | Unit | |
Case operating Temperature | Industrial | TC | -40 |
| 85 | °C |
Extended | -5 |
| 85 | °C | ||
Commercial | 0 |
| +70 | °C | ||
Supply Voltage | VCC | 3.135 |
| 3.465 | V | |
Supply Current | Icc |
|
| 300 | mA | |
Inrush Current | Isurge |
|
| Icc+30 | mA | |
Maximum Power | Pmax |
|
| 1 | W |
Parameter | Symbol | Min. | Typical | Max. | Unit | Note |
Transmitter Section: | ||||||
Center Wavelength | λc | 840 | 850 | 860 | nm |
|
Spectral Width(RMS) | σRMS |
|
| 0.85 | nm |
|
Optical Output Power | Pout | -9 |
| -3 | dBm | 1 |
Extinction Ratio | ER | 8.2 |
|
| dB |
|
Optical Rise/Fall Time | tr / tf |
|
| 260 | ps | 2 |
Relative Intensity Noise | RIN |
|
| -120 | dB/Hz |
|
Output Eye Mask | Compliant with IEEE802.3 z (class 1 laser safety) |
| ||||
Receiver Section: |
| |||||
Optical Input Wavelength | λc | 770 |
| 860 | nm |
|
Receiver Overload | Pol | 0 |
|
| dBm | 4 |
RX Sensitivity | Sen |
|
| -18 | dBm | 4 |
RX_LOS Assert | LOS A | -29 |
|
| dBm |
|
RX_LOS De-assert | LOS D |
|
| -19 | dBm |
|
RX_LOS Hysteresis | LOS H | 0.5 |
|
| dB |
|
General Specifications: | ||||||
Data Rate | BR |
| 1.25 |
| Gb/s |
|
Bit Error Rate | BER |
|
| 10-12 |
|
|
Max. Supported Link Length on 50/125μm MMF@1.25Gb/s | LMAX |
| 550 |
| m |
|
Total System Budget | LB | 8 |
|
| dB |