Miray 100G QSFP28 SR4 optical transceiver integrates the transmit and receive path onto one module. It converts parallel electrical input signals into parallel optical signals, by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The transmitter module accepts electrical input signals compatible with Common Mode Logic (CML) levels. All input data signals are differential and internally terminated. The receiver module converts parallel optical input signals via a photo detector array into parallel electrical output signals. The reCML) levels. All data signals are differential and support a data rates up to 27.9525Gb/s per channel.ceiver module outputs electrical signals are also voltage compatible with Common Mode LogicOn This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface.
Parameter | Symbol | Unit | Min | Typ | Max |
Operating Case Temperature Range | Tc | oC | 0 | 70 | |
Power Supply Voltage | Vcc | V | 3.14 | 3.3 | 3.46 |
Bit Rate | BR | Gb/s | 103.1 | ||
Bit Error Ratio | BER | 5*10-5 | |||
Max Supported Link Length(OM3 MMF) | L | m | 70 | ||
Max Supported Link Length(OM4 MMF) | L | m | 100 |
Parameter | Symbol | Unit | Min | Typ | Max | Notes |
Transmitter | ||||||
Signaling Speed per Lane | GBd | 25.78125 ± 100 ppm | ||||
Average Launch Power per Lane | TXPx | dBm | -8.4 | 2.4 | ||
Optical Extinction Ratio | ER | dB | 2 | |||
Average launch power of OFF transmitter, per lane | dBm | -30 | ||||
Optical Return Loss Tolerance | dB | 12 | ||||
Transmitter Eye mask definition {X1,X2,X3, Y1,Y2,Y3} | IEEE 802.3bm 100Gbase-SR4 | |||||
Receiver | ||||||
Signaling Speed per Lane | GBd | 25.78125 ± 100 ppm | ||||
Average Received Power per Lane | RXPx | dBm | -10.3 | 2.4 | ||
Receive Sensitivity(OMA) per lane | SRS | dBm | -7.4 | |||
Damage Threshold Per Lane | Pmax | dBm | 3.4 | |||
LOS De-Assert | LOSD | dBm | -13 | |||
LOS Assert | LOSA | dBm | -30 | |||
LOS Hysteresis | dB | 0.5 |