Miray’s QSFP-40G-SR4 is a parallel 40Gbps Quad Small Form-factor Pluggable (QSFP) optical module.It provides increased port density and total system cost savings. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gbps operation for an aggregate data rate of 40Gbps over 100 meters of OM3 multi-mode fiber.An optical fiber cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle.
The module operates by a single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available with the modules. A 2-wire serial interface is available to send and receive more complex control signals, and to receive digital diagnostic information.
Parameter | Symbol | Min | Typ | Max | Unit | Remarks |
Operating Case Temperature | TOP | 0 | - | 70 | °C | - |
Power Supply Voltage | VCC | 3.135 | 3.3 | 3.465 | V | - |
Data Rate, each lane | - | - | 10.3125 | 11.2 | Gb/s | - |
Control Input Voltage High |
- | 2 | - | VCC | V | - |
Control Input Voltage Low |
- | 0 | - | 0.8 | V | - |
Link Distance (OM3) | D | - | - | 100 | m | - |
Parameter | Symbol | Min. | Typical | Max | Unit | Notes |
Center Wavelength | λC | 840 | 850 | 860 | nm | - |
RMS Spectral Width | ∆λrms |
| 0.5 | 0.65 | nm | - |
Average Optical Power, each Lane | PAVG | -7.6 |
| 1.0 | dBm | 1 |
Optical Modulation Amplitude (OMA), each Lane | POMA | -5.6 | - | 3.0 | dBm | 2 |
Difference in Launch Power between any Two Lanes (OMA) | Ptx,diff | - | - | 4.0 | dB | - |
Peak Power, each Lane | PPT |
| - | 4.0 | dBm | - |
Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP), each Lane | OMA- TDP |
-6.5 |
- |
- |
dBm |
- |
TDP, each Lane | - | - | - | 3.5 | dB | - |
Extinction Ratio | ER | 3.0 | - | - | dB | - |
Relative Intensity Noise | RIN | - | - | -128 | dB/Hz | 12dB reflection |
Optical Return Loss Tolerance | TOL | - | - | 12 | dB | - |
Encircled Flux | - | >86% at 19um <30% at 4.5um | - | - | ||
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3} | - | 0.23, 0.34, 0.43, 0.27, 0.35, 0.4 | - | - | ||
Average Launch Power OFF Transmitter, each Lane | Poff | - | - | -30 | dBm | - |
Parameter | Symbol | Min | Typ | Max | Unit | Notes |
Center Wavelength Range | lC | 840 | 850 | 860 | nm | - |
Damage Threshold, each lane | THd | 3.4 | - | - | dBm | 3 |
Average Power at Receiver Input, each lane | - | -9.5 | - | 2.4 | dBm | - |
Receiver Reflectance | RR | - | - | -12 | dB | - |
Receiver Power (OMA), each Lane | - | - | - | 3.0 | dBm | - |
Stressed Receiver Sensitivity (OMA), each lane | - | - | -- | -5.4 | dBm | 4 |
Receiver Sensitivity (OMA), Each Lane | SEN | - | - | 7.5 | dBm | - |
Peak Power, each Lane | PPR | - | - | 4.0 | dBm | - |
LOS Assert | LOSA | -30 | - |
| dBm | - |
LOS Deassert | LOSD | - | - | -12 | dBm | - |
LOS Hysteresis | LOSH | 0.5 | - | - | dB | - |
Conditions of Stress Receiver Sensitivity Test (Note 5) | ||||||
Vertical Eye Closure Penalty, each Lane | - | - | 1.9 | - | dB | - |
Stressed Eye J2 Jitter, each Lane | - | - | 0.3 | - | UI | - |
Stressed Eye J9 Jitter, each Lane | - | - | 0.47 | - | UI | - |
OMA of each aggressor Lane | - | - | -0.4 | - | dBm | - |