Miray’s QSFP+ transceiver module is designed to operate over single-mode fiber system using 4X10 CWDM channel in1310 band and links up to 10km. The module converts 4 inputs channel of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.
The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm. It contains a duplex LC connector for the optical interface and a 38-pin connector for the electrical interface. Singlemode fiber (SMF) is applied in this module. This product converts the 4-channel 10Gb/s electrical input data into CWDM optical signals (light), by a 4-wavelength Distributed Feedback Laser (DFB) array. The 4 wavelengths are multiplexed into a single 40Gb/s data, propagating out of the transmitter module via the SMF. The receiver module accepts the 40Gb/s optical signals input, and de-multiplexes it into 4 CWDM 10Gb/s channels. Each wavelength light is collected by a discrete photo diode, and then outputted as electric data after amplified by a TIA.
Parameter | Symbol | Unit | Min | Typ | Max |
Operating Case Temperature Range | Tc | oC | 0 |
| 70 |
Power Supply Voltage | Vcc | V | 3.14 | 3.3 | 3.46 |
Bit Rate | BR | Gb/s |
|
| 41.2 |
Bit Error Ratio | BER |
|
|
| 10-12 |
Max Supported Link Length | L | Km |
|
| 10 |
Parameter | Symbol | Unit | Min | Typ | Max | Notes |
Transmitter(per Lane) | ||||||
Signaling Speed per Lane |
| GBd |
|
| 10.3125
|
|
Lane Wavelength (range): L0 L1 L2 L3 |
| nm | 1264.5~1277.5 1284.5~1297.5 1304.5~1317.5 1324.5~1337.5 |
| ||
Total Average Launch Power | Pout | dBm |
|
| 8.3 |
|
Transmit OMA per Lane | TxOMA | dBm | -4 |
| 3.5 |
|
Average Launch Power per Lane | TXPx | dBm | -7 |
| 2.3 |
|
Optical Extinction Ratio | ER | dB | 3.5 |
|
|
|
Side-Mode Suppression Ratio (SMSR) | SMSR | dB | 30 |
|
|
|
Average launch power of OFF transmitter, per lane |
| dBm |
|
| -30 |
|
Relative Intensity Noise | RIN | dB/Hz |
|
| -128 |
|
Optical Return Loss Tolerance |
| dB |
|
| 20 |
|
Transmitter Reflectance |
| dB |
|
| -12 |
|
Transmitter Eye mask definition {X1,X2,X3, Y1,Y2,Y3} |
|
| {0.25,0.4,0.45,0.25,0.28,0.4} |
| ||
Receiver(per Lane) | ||||||
Signaling Speed per Lane |
| GBd |
|
| 10.3125 |
|
Lane Wavelength (range): L0 L1 L2 L3 |
| nm | 1264.5~1277.5 1284.5~1297.5 1304.5~1317.5 1324.5~1337.5 |
| ||
Receive Power(OMA) per Lane | RxOMA | dBm |
|
| 3.5 |
|
Average Received Power per Lane | RXPx | dBm | -13.7 |
| 2.3 |
|
Receiver sensitivity (OMA), each lane (max) |
| dBm |
|
| -11.5 |
|
Stressed Receive Sensitivity(OMA) per lane | SRS | dBm |
|
| -9.6 |
|
Damage Threshold Per Lane | Pmax | dBm |
|
| 3.4 |
|
Return Loss | RL |
|
|
| -26 |
|
Vertical eye closure penalty, per lane |
| dB |
|
| 1.9 |
|
Receiver electrical 3dB upper cutoff frequency,per lane |
| GHz |
|
| 12.3 |
|
LOS De-Assert | LOSD | dBm |
|
| -15 |
|
LOS Assert | LOSA | dBm | -30 |
|
|
|
LOS Hysteresis |
| dB |
| 1 |
|