Miray Gigabit Ethernet media converters provide an easy and economical solution to upgrade a copper based network to fiber optic to extend the signal reach, or to bridge copper and optical fiber cabling by converting an electrical signal to an optical signal. Their plug-and-play design enables a quick and easy installation. LED indicators are provided for confirming equipment operating status.
Half or full duplex auto-negotiation
Auto MDI/MDI-X for copper port
Plug-and-play installation
Extend network distance up to 20 km
Accommodate a variety of connector types
Standards | IEEE 802.3, 10Base-T |
Ports | 1 x 10/100/1000Base-T port, |
Copper Interface | RJ45 port (Auto-MDI / MDI-X) Twisted Pair |
Optic Interface | SC, ST, FC, LC |
Fiber Maximum Distance | MM: 550m |
Optic Wavelength | Multimode: 850nm, 1310nm |
Speed | 10/100/10000Mbps |
Cable | Twisted-pair |
LED Indicator | 1000Mbps, 100Mbps, FX/ACT, TX/ACT, FDX, PWR |
Power Supply | External : 5V DC 2A |
Dimensions | 25 x 70 x 95 mm |
Weight | 0.2kg |
Operating Environment | Operating temperature: 0 ~ +50 degrees C; |
Storage Environment | storage temperature: -20 ~+70 degrees C; |
Emissions | FCC Part 15 , Class A, RoHS and CE Mark |
Ordering Information
Part Number | Description |
MR-1001S20AB | 10/100/1000M Single fiber SM 20KM SC External Power Supply |
MR-1001S40AB | 10/100/1000M Single fiber SM 40KM SC External Power Supply |
MR-1001S60AB | 10/100/1000M Single fiber SM 60KM SC External Power Supply |
MR-1001S80AB | 10/100/1000M Single fiber SM 80KM SC External Power Supply |
Application